The Best 12V Cooling Pump

Specifications:
Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140F
Item dimension: 51mm*34mm*42.7mm
Note:
1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Package includes:
1 * Water pump

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in 
                                     or 24.5cm / 9.6in 
                                     or 29.5cm / 11.6in 
                                     or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g

Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut

It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise

Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler

Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉

Specification:
Material: Acrylic + ABS
Model: PU-FS4-J
Rated current: 0.7A
Rated function: 8W
Pump head: 4 meters
Pump flow: 800L/H
Starting voltage: 7V
The highest voltage: 13.5V
No-load speed: 5000RPM
Load speed: 3000RPM
Size: Approx. 5.5 * 6.4 * 6.4 cm/ 2.2 * 2.5 * 2.5 in
Weight: about 285 g

Package list:
1 * Water Pump
1 * Rubber Mat

Important Tips:

Please add a filter to avod hair or dirts being clogged with in this pumps.
if our pump does not working properly, please try to open and clean it before sending back to us,thank you very much!

Specifications:

Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140°F
Item dimension: 51mm*34mm*42.7mm

Note:

1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;

The Enhanced D5 Liquid Cooling 12V Pump Motor is packed with a new PWM control chip. With this new controller the D5 now has a duty-cycle, feedback, and PWM control that scales in a similar way as the DDC 3.25. This makes it a very reliable and smooth operating pump. This PWM control allows you to automate the pump speed based on CPU temperature using the motherboard PWM CPU fan header. This functionality keeps your pump only running at speeds that are needed. This also allows the safety feature of auto shut down based on RPM feedback if available in your BIOS.
Warnings/Cautions:
Use of caustic and/or abrasive coolant will void your warranty and may cause your pump to fail. Running D5 pumps dry (without fluid) immediately voids the warranty. Replacements / RMAs will not be given under these conditions.
PrimoChill is not responsible for any hardware damage. Use at your own risk. This pump comes stock without any housing allowing you to integrate any of your favorite pump tops and pump accessories. Due to this the pump cannot be used as a standalone unit.
Nominal voltage:12 V DC
Operating voltage range:8 to 24 VDC
Nominal power (@ 12 V):37 W
Max Nominal current (@ 12 V):2 amps
Motor type:Brushless, microprocessor controlled Maximum head:12.79 ft (3.9 m)
Maximum discharge:~ 396 GPH (1500 LPH)
Maximum system temperature: 140°F (60°C)
Performance will vary based on housing used

This is a compact size submersible water pump(none self-prime). It's built by a brushless motor providing smooth and quiet operation than a non-brushless water pump.

Note:
1. It can be used in the water or other liquids(without particles and impurities); NOT for acid and alkali solution.
2. DO NOT dry burn the pump, otherwise it would be damaged;
3. PLEASE let the pump vibrate several times in the water to exhaust air, then it can work normally.

Specifications:
Color: Black
Pump material: ABS
Temperature resistance range: 0 ~ 60°C
Condition of use: Continuously
Power consumption: 4.2W
Rated voltage: 12V DC
Max flow rate: 240L/H
Max lift: 300cm / 9.8ft
Noise: Less than 35dB
Outer diameter of inlet / outlet: 9mm / 0.35in
Inner diameter of inlet / outlet: 6mm / 0.24in
Waterproof class: IP68
Product size: 56 * 52 * 47mm / 2.2 * 2 * 1.8in 
Product weight: 64g / 2.28oz
Package size: 6.2 * 6.2 * 4cm / 2.44 * 2.44 * 1.57in
Package weight: 77g / 2.73oz

Package List:
1 * Brushless DC Pump
1 * Adapter Plate

Features:
LED power indicator to indicate power-on state
Control circuit, the pump is more stable
Tap out the instructions marked
Small 3P power connector can be directly plugged into the headboard fan original position
Support speed testing function
With rubber shock absorber base, ultra-quiet experience.

Specification:
Model:SC-300T
Flow:max300L/h
Head:max1.9 meters
Power Connector:Small 3P connector
Voltage:DC12V
Power:4W
Water tank capacity:150ml
Noise:23DB
Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
Tap Diameter: 9.4 mm
Tips:It is good to use the pipe with 8MM inner diameter

Package included:
1pcs ultra-quiet Water pump

Features:

A kit of computer water cooling reservoir, consists of a main water reservoir, plastic brackets, L-type metal stand and screws kit. Effectively for heat reducing, maintain the proper temperature to keep the computer running well. Made of high-quality POM and PMMA material, shock, acid and alkali resistance, durable to use. Full open design, free to screw up and down. Noise reduction, work quietly and do not disturb you while you are working or studying on the computer.

Specifications:

Color: Transparent

Shape: Cylinder

Screw Thread: G1/4

Material: POM + PMMA

Interface Diameter: Approx. 12.9mm

Package Size: Approx. 20 * 14 * 7cm

Weight: 200g

Package List:

1 * Cylinder Water Reservoir

2 * Plastic Brackets

2 * L-Type Metal Stands

1 * Screws Kit