We spent many hours on research to finding 6.5 hp predator engine, reading product features, product specifications for this guide. For those of you who wish to the best 6.5 hp predator engine, you should not miss this article. 6.5 hp predator engine coming in a variety of types but also different price range. The following is the top 9 6.5 hp predator engine by our suggestions
507 reviews analysed
1. GO KART TORQUE CONVERTER for PREDATOR ENGINE, 6.5 HP 212CC 3/4" OHV HORIZONTAL SHAFT, ENGINE CLUTCH.75 inch, Replaces Comet TAV2 218353A, 12t 35 and 10T 40 or 41 ✮ By BULLET LINES
Feature
- unique engine bolt kit for predator engines and the correct anti vibration pilot washer.
- 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
- small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter
- A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration
- Engagement range is approximately 2350 RPM
Description
This auction is for 1 brand new complete 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine Torque Converter with all hardware necessary to mount.
Important Note: Included is the unique engine bolt kit for predator engines and the correct anti vibration pilot washer. Predator engines have a shoulder at the crank that is off by which cause the driver to rub on the back plate and misalignment of the belt; We provide extra piece of hardware to fix the problem. (no other kit on the market provides everything needed to fit a 212cc predator engine).
This kit comes with either a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
Bullet Lines torque converter is an asymmetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments.
Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
Engine compatability: Predator 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine.
Specifications:
2. FitBest New Carburetor w/Gaskets for Harbor Freight Predator 6.5 HP 212cc Go Kart OHV Engine
3. Lifan LF168F-2BQ 6.5 HP 196cc 4-Stroke OHV Industrial Grade Gas Engine with Recoil Start and Universal Mounting Pattern
Feature
- Industrial grade OHV 4-stroke gasoline engine with .75″ keyway shaft
- General purpose engine with universal mounting plate: great for recreational vehicles, construction, farm, and ranch
- Built to meet and exceed industrial grade quality standards and provide dependable performance
- Replaces Honda, Briggs, Kohler, and other brands
- EPA certified
- Compression release for E-Z starting – low oil shutdown engine protection
Description
Lifan offer industrial grade OHV engines that are quiet and provide dependable performance. All Lifan engines are built to meet and exceed industrial grade quality standards, true 1600 hours engines with cast iron sleeves, automotive grade rods, pistons, rings, crankshafts, cam shafts, and other internal parts. These replacement engines can be used for many applications including but not limited to pressure washers, air compressors, trenchers, concrete mixers, concrete saws, mortar mixers, go-karts and more.
4. AlveyTech 212cc 6.5 Hp Predator High Performance Air Filter Intake Kit for Go-Karts & Mini Bikes
Feature
- Designed for the 212cc 6.5 Hp Predator engine
- A great filter upgrade for the Baja Motorsports Mini Bike MB165 & MB200 (Heat, Mini Baja, Warrior), Coleman CT200U Trail, Monster Moto MM-B212, & many more 6.5cc brands & models.
- This big filter can be used on go-karts, mini bikes, & more.
- Our kit includes the filter, the filter-to-carburetor mounting stud, stack, adapter, bracket, hose clamp, & hardware.
- Monster Scooter Parts is the only authorized seller of AlveyTech products.
Description
Upgrade your big engine with our 212cc 6.5 Hp Predator high-performance air filter intake kit for go-karts and mini bikes. This is a truly magnificent air filter kit for the Baja Motorsports Mini Bike MB165 & MB200 (Heat, Mini Baja, Warrior), the Coleman CT200U Trail, the Monster Moto MM-B212, and many more 6.5cc go-kart and mini bike brands and models.
It’s a quick and easy job to upgrade your engine’s air filter. Larger displacement gas powersports engines need larger volumes of clean dust-free air into the carburetor in order to produce the horsepower that you want when on the track or trail.
This big filter does a superlative job in keeping the dust and crud out of your carb, resulting in better horsepower and smoother running.
This kit includes the filter, stack, gasket, filter-to-carburetor mounting stud, adapter, bracket, hose clamp, and hardware.
Specifications:
Overall Diameter at Widest Point: 95 mm
Overall Diameter at Top: 85 mm
Rubber Intake Inner Diameter: 60 mm
Rubber Intake Outer Diameter: 74 mm
Overall Height: 160 mm
Compatibility:
Baja Motorsports Mini Bike MB165 & MB200 (Heat, Mini Baja, Warrior)
Coleman CT200U Trail
Monster Moto MM-B212
Predator Predator 212cc
5. Kuupo 69730 69727 212CC Carburetor + Recoil Starter + Ignition Coil Spark Plug Kit for Harbor Freight Predator 6.5 HP 7HP 173CC 212CC Go Kart OHV Engine R210 68121 68120
Feature
- Fit for Harbor Freight Branded Chicago Electric Predator Gasoline Engine Powered by a 212CC 6.5HP 7HP Engine (RATO R210-III)
- Model 68121, 69727, 68120, 69730
- Carburetor specs: mounting hole center to center: 42mm, core hole: 19mm, choke hole: 24mm
- Recoil starter length center to center hole is 160mm
- Comes with : 1 carburetor with gaskets, 1 recoil starter with cup, 1 ignition coil, 1 air filter, 1 insulator, 1 joint fuel filter, 1 three cable on/off switch, 1 spark plug
Description
Applied Models:
212CC 6.5HP Horizontal Keyway Shaft Gasoline Engine Models 68121, 69727, 68120 & 69730
6. Briggs and Stratton 13R232-0001-F1 Engine
Feature
- Dura-bore cast iron cylinder sleeve for extended life
- Maintenance-free Magnetron electronic ignition for quick, dependable starts
- Overhead valve design (OHV) for cooler operation and longer valve life
- Dual ball bearing
- Dual-clean air cleaner pleated paper filter with a foam pre-cleaner ensures maximum protection for extended engine life
Description
This genuine 208cc Briggs & Stratton single cylinder engine offers dependable power for your equipment needs. With a power rating of 9.50 gross torque, this engine features a premium dual clean air filtration system and maintenance-free Magnetron electronic ignition. With a manufacturer limited warranty of 2 years consumer use / 90 days commercial use, Briggs & Stratton provides power that you can trust. This engine includes a Dura-Bore cast iron cylinder sleeve for extended life. This engine includes an installed muffler. This engine includes a fuel tank.
7. MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420
Feature
- 【30 Series Torque Converter Clutch Kit】 This 3/4″ Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.
- 【The Belt Feature】 Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″.（1.9cm / 0.75″). Center to Center of driver and driven: 6-15/16 to 7″.
- 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
- 【Go Kart Torque Converter Kit comes with】1 x 3/4″ Driver Pulley
- 1 x 5/8″ Driver Pulley
- 1 x Plastic Assy Cover
- 1 x Aluminum Mounting Plate
- 1 x Drive Belt
- 1 x 10 Tooth Sprocket for #40/41/420 Chain
- 1 x 12 Tooth Sprocket for #35 Chain(Chain not included)
- 1 x Full Mounting Hardware. Note This is not made by Comet
Description
TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability: compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan
This is a quality after market reproduction of the Comet made TAV2 Torque converter kit. Designed to be used on go-karts, mini-bikes and wake wrenches with engine sizes 3hp to 7hp. This is a must on live axle go-karts especially those with rear tires larger than 16" tall. A centrifugal clutch will not pull or hold up to these demands. For your convenience this kit comes with both sprockets, a #35 chain 12 tooth sprocket and the #41/40/420 chain with the #10 tooth sprocket.
Specifications:
Large Pulley Driven unit: Dia. 157mm or 6"
Driver clutch bore: 3/4"
Top width: 19mm(3/4")
Sprocket teeth: 10 tooth for #40/41 chain and 12 tooth for #35 chain
Engagement range: 2350-200 RPM
Recommended engine: 2HP – 7HP engines, 3/4"shaft with flat key
Fits all engines with a 3/4" Straight Crankshaft.
This Kit Includes:
1 x Drive Belt
1 x Plastic Cover
1 x 3/4" Driver Pulley
1 x 5/8" Driven Pulley (6" Diameter)
1 x Aluminum Mounting Plate
1 x 10 Tooth Sprocket for #40 #41 Chain
1 x 12 Tooth Sprocket for #35 Chain
1 x Mounting Hardware Kit
This kit has everything you will need!!
Please see pictures for all that is included.
8. Centrifugal Clutch 3/4 Bore 12T for #35 Chain Compatible for Go Kart Minibike Lawnmower Fun Kart Engine 3/4 Bar
Feature
- Fits for Go Kart and Mini Bike, Lawnmower and Fun Kart
- Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh Engines
- Also fits any other engines with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clones, 6.5 HP clones
- Tooth: 12T sprocket for #35 chain
- Package included: 1 x Centrifugal Clutch
- 1 x #35 Chain
Description
Specifications:
– Material: Iron
– Package Dimensions: (13.77 x 4.92 x 5.91)” / (35 x 12.5 x 15)cm (L x W x H)
– Weight: 4.76 lbs / 2.16 kg
– 3/4″ Bore
– Tooth: 12
– #35 Chain: 4ft
– Fitment: Minibike, Go Kart, Lawnmower
– Replacement: Comet, Predator, Manco and more
– Features: Durable, Maximum torque, Wear-resisting, Fast heat dissipation
Package Includes:
1 x Centrifugal Clutch
1 x #35 Chain
9. MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4" Bore 10T #40/41/420 China (Complete 3/4" Torque Converter Set)
Feature
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft.
- Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain
- This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.
Description
TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability: compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan
Specifications:
Driver Clutch Bore: 3/4"
Driven Clutch Bore: 16mm
Driven Clutch Dia: 157mm or 6"
Sprocket: 10 teeth for #40/41/420 chain
Belt: Asymmetrical type
Belt Top Width: 19mm(3/4")
Engagement Speed: 2200±200 RPM
Recommended Engine: 2HP – 8HP engines, 3/4" shaft with flat key
Fits all engines with a 3/4" Straight Crankshaft.
This Kit Includes:
1x Drive belt
1x Driver pulley
1x Driven pulley 16mm bore 6" diameter
1x Plastic cover
1x Full mounting hardware kit
1x 10 Teeth sprocket for #40/41/420 chain(chain not included)
1x Aluminum mounting backplate
This kit has everything you will need!!
Please see pictures for all that is included.
Conclusion
By our suggestions above, we hope that you can found 65 Hp Predator Engine for you.Please don’t forget to share your experience by comment in this post. Thank you!
