Top 9 Steel Shark Leaders

This Listing is for our 18/0 carbon steel inline circle hook shark rig (480# test, 7×7 49 strand construction bright stainless steel cable). Our circle hook shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco Brass Swivel. The finished rig is just over ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. Like all of our rigs, each one is made by hand in the USA. A key feature to all Cardinal Tackle Shark Rigs is the protected connections. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. The heat shrink tubing: (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

The function of fishing wire leader
1. Avoid the momentary pulling of the throwing, the friction between the main line and the guide ring will damage to the main line
2. After dragging the bait or caught fish, protect the front end of the main line to avoid rubbing against obstacles;
3. Conceal the main line, reduce the fish alertness after finding the fishing line
4, offset the momentary pulling force that may occur after caught fish, buffering function
5. The marking function when recovering the bait to prevent the bait from colliding with the leader ring of the fishing rod and injuring people;
6.The use of reliable front wires higher than the strength of the main line increases the possibility of trying to choose a finer main line, thus making the throw easier and the bait flying farther

Surflon 1×7 is a great all-around leader wire for toothy fish. This wire is our Surfstrand 1×7 stainless steel with a smooth coating of nylon. A specially selected grade of nylon, tough yet flexible, is used to seal out water, reduce visibility, and improve the life of the line. Compared to old style 1×3 construction, Surflon’s 1×7 construction offers higher break strength and more realistic action. Surflon 1×7 is an effective leader wire for hard-charging, toothy fish such as Bluefish, Muskie and Mackerel.

Top quality Bright stainless steel cable. 400 lb test 30 ft spool.Includes 10 crimps. Use Cable cutters for clean cut.

Specification:

Type: Shark Rig

Test: 400lb

Quantity: 1pack/2packs

Material: Stainless Steel+Nylon

Features:

1. Well made ready rig and good value. Tooth guard. Very heavy duty. Large hook

2. 400lb nylon coated stainless steel cable, strong and sturdy

3. Hand-tied and machine crimped for strength, shrink-wrapped for abrasion resistance

4. If you are looking for some rigs for the big boys, you have to buy this/try this.

Note:

The Hooks Are Really Sharp, so Care Should Be Taken When Handling Them.

DO NOT Put it on the Place Where Children Can Take it Easily.

Perhaps the best leader wire available! Surflon Micro Supreme is miniature 49 strand stainless steel wire that is extremely flexible and kink resistant. This wire is ideal for many types of sport fishing because it can be knotted to your bait and line like monofilament, it provides greater flexibility and less stretch than monofilament, and is generally smaller diameter per pound test, and therefore, less visible in the water. Surflon Micro Supreme is extra limp and has virtually no memory or stretch. The wire enhances the action of live and artificial baits and adds a level of realism never before attainable using wire or other leader materials such as monofilament and fluorocarbon. This wire is ideal for presenting life-like bait at any depth and can fool tackle-shy Billfish while withstanding the violent razor-sharp strikes of King Mackerel and Shark. Excellent for casting flies and tempting the most discriminating toothy fish to the surface. No other wire offers more realistic action both above and below the water. Low elasticity and high sensitivity allow you to set hooks faster and with more accuracy. Attach using common monofilament knots such as the Albright Knot, Clinch Knot, Nail Knot, Perfection Loop, Surgeon’s Loop, or Uni-Knot.

Tooth Proof leader wire lives up to its name and provides maximum protection the ferocious jaws of Barracuda, King Mackerel, Wahoo and other toothy fish. Made from specially controlled Type 304 stainless steel alloy to be hard, but not brittle, and to deliver the perfect combination of flexibility and strength. Tooth Proof possesses incomparable abrasion resistance and tames the toughest toothy fish. AFW’s unique pre-straightening process eliminates cast, providing a straighter leader wire with improved kink resistance. Tournament tested tough, this proven leader wire continues to put anglers on the winner board!

Length: Approx 50cm / 19.68″
Stainless steel line dia.: 1mm
High Strength Rolling Swivels: 2cm/0.79inch
Duo Lock Snaps: 5# 2.8cm/1.1inch

Test: 100 lbs

Package including:
20pcs x 19.68inch Length Fishing wire