Nowadays, there are so many products of 1/2 hp sump pump cast iron in the market and you are wondering to choose a best one.You have searched for 1/2 hp sump pump cast iron in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 1/2 hp sump pump cast iron which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
550 reviews analysed
1. WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Description
Product Description
1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.
2. Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
Description
Product Description
FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity
From the Manufacturer
Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.
3. WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Feature
- The product is manufactured in china
- Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
- The product is highly durable and easy to use. 8 feet water resistant power cord
- Easy installation and easy handling. 120 V, PSC, Oil-Filled 3/4 HP Motor
- For Use In 11 inch. Diameter or Larger Sump Basins
Description
Product Description
3/4 hp, cast iron/stainless steel, submersible sump pump, with vertical switch, designed for 11 inch diameter or larger sump basin, pumps up to 4600 gph at 0′, durable cast iron volute, reliable, reinforced poly carbonate impeller, corrosion resistant stainless steel motor housing & fasteners, top suction design filters debris & minimizes clogging, oil filled, thermally protected motor prevents overheating, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 3/4 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups, 5 year warranty. This product is assembled in the USA. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU980E submersible sump pump can move up to 4600 gallons per hour (gph). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
4. Superior Pump 92511 1/2 HP Cast Iron Submersible Sump Pump with Vertical Float Switch
Feature
- 1/2 HP Sump pump moves up to 4,200 gallons per hour
- pump will lift water up to 25′ of vertical height
- Rugged cast iron construction
- 10-foot cord length
- Vertical float switch to automatically turn the pump on/off
- 1-1/2 inch NPT discharge for high capacity pumping
- Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
Description
Product Description
Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 92511, 1/2 HP cast iron submersible sump pump with vertical float switch, will move water up to 4200 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/2-inch solids with ease. This pump is UL/CUL listed and CSA certified and backed by a 3 year warranty.
From the Manufacturer
Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70’s, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service – Superior Pumps Built to Last!
5. WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Feature
- N/A
- Imported
- Assembled in the US with foreign and domestic parts.
- Tested to 1 million cycles*
- Mechanical float switch provides reliable operation and allows installation in sump basins 11″ in diameter or larger
- Top suction strainer filters debris and protects pump from clogging. The pump does not require weep holes and the cast iron seal plate prevents galvanic corrosion and leaks
- High capacity 1-1/2″ npt discharge
- Heavy duty oil filled motor for long life
- Cast iron pump housing for durability
Description
Product Description
1/3 hp, cast iron, submersible sump pump, with vertical switch, pumps up to 3800 gph at 0′, designed for 11 inch diameter or larger sump basin, top suction design filters debris & minimizes clogging, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 1/3 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups. The product is manufactured in china. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU790 features durable cast iron housing for long life and quiet operation. This submersible pump is compactly designed for 11″ or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1 1/2″ discharge allows easy installation plus maximum flow. Similar applications to the following brands of submersible sump pumps , Craftsman, Zoeller, Flotec, Water Ace, Myers, Little Giant, Liberty, Pit Viper, Ridgid, Blue Angel, Sta-Rite, Starite, Diamond, Star, Flint and Walling, Coleman, Maytag, Jacuzzi, ShurDri, Shur-dri, GSW, Teel, Master Plumber, UL listed
6. WAYNE CDU1000 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch – 58321-WYN2
Feature
- Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
- Stainless steel motor housing and rugged, cast iron pump base
- Fully submersible
- 1 hp
- max. maximum flow rate is 6100 Gallons Per Hour, 5100 GPH at 10 feet of discharge lift
- 1-1/2″ npt discharge
- Assembled in the US with foreign and domestic parts.
Description
Product Description
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. the top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-inch diameter and larger sump pits.8 feet Water Resisitant Power Cord provides easy access to nearby GFCI(round fault circuit interrupter) protected outlet
From the Manufacturer
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
7. Superior Pump 92341 1/3 HP Cast Iron Submersible Sump Pump with Vertical Float Switch
Description
Product Description
Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 92341, 1/3 HP cast iron submersible sump pump with vertical float switch, will move water up to 2760 gallons per hour. Upgraded durable stainless steel impeller for improved performance. Equipped with suction screen to filter out large debris and handles up to 3/8-inch solids with ease. This pump is UL/CUL listed and CSA certified and backed by a 3 year warranty.
From the Manufacturer
Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70’s, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service – Superior Pumps Built to Last!
8. Superior Pump 93501 1/2 HP Cast Iron Sewage Pump with Tethered Float Switch
Feature
- 1/2 HP Sewage pump moves up to 4,800 gallons per hour
- pump will lift water up to 25′ of vertical height
- Rugged cast iron construction
- 10′ cord length
- Tethered float switch to automatically turn the pump on/off.
- 2 inch NPT discharge, will handle up to 2 inch solids and features a non-clogging vortex impeller
- Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
Description
Product Description
Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 93501, 1/2 HP cast iron submersible sewage pump with tethered float switch, will pump up to 4800 gallons per hour. Equipped with 2-inch NPT discharge, will handle up to 2-inch solids and features a non-clogging vortex impeller. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.
Amazon.com
From Superior Pump, this submersible sewage pump features a tethered float switch and a reliable 1/2-horsepower continuous-duty motor. Able to handle 2-inch solids, this large-capacity pump can lift water up to 25 feet and deliver flow rates up to 80 gallons per minute. Its cast iron body and non-clogging Vortex impeller ensure a long, low-maintenance life.
Large Capacity Suited to Home and Commercial Applications
This dependable, submersible sewage pump is built to effectively handle a range of typical residential and commercial applications. Whether material is being moved from a basin to a drainage field or from a basin up to sewer or septic lines, the pump’s large discharge design easily handles 2-inch solids and high-capacity pumping. It is powerful enough to lift water up to 25 feet vertically. When used on a level plane, it can move up to 80 gallons per minute. This sewage pump delivers a maximum force of 10.83 psi.
Continuous-Duty Motor for Reliable Performance
Behind the pump’s consistent performance is a continuous-duty split-capacitor motor. This 7.6 amp, 1/2-horsepower motor operates at speeds up to 1,750 rpm and can produce 912 watts of power. It is thermally protected and rated for 180 degrees Fahrenheit (82 degrees Celsius).
Cast Iron Design with Non-Clogging Vortex Impeller
Thanks to a dependable, non-clogging Vortex impeller made of cast aluminum, as well as rugged cast iron housing and base construction, this Superior Pump unit can be trusted to withstand continuous use in tough environments. For added durability, this pump features stainless steel fasteners and a baked-on powder-coat finish. Its tethered float switch relies on a wide-angle, mechanical, pump-mounted float that’s constructed of glass-reinforced nylon.
The 10-foot, water-resistant power cord makes it easy to connect the pump to a power source. This sewage pump is UL/C-UL listed and CSA certified for safety and dependability.
What’s in the Box
93501 sewage pump
93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch
At a Glance
- Powerful, 1/2-horsepower continuous-duty split-capacitor motor
- Handles 2-inch solids and high-capacity pumping
- Moves up to 80 gallons per minute
- Can push water up to 25 feet vertically
- Cast aluminum, non-clogging Vortex impeller
- Durable, cast iron housing and base for long life
9. Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch
Description
Product Description
Liberty Pumps 257 is a 1/3HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 10ft power cord. Turn-on level of the not adjustable switch is 7″ and turn-off level is 3-1/2″. This pump can operate in a smaller 10″ diameter sump pit.The Liberty Pumps 257 has 1-1/2″ NPT discharge, 1/2″ solids-handling, 18′ shut-off head, a unique one-piece cast iron housing and thermally protected permanently lubricated motor.For Sump and De-watering Applications only. This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 251 and 253) are better suited for effluent applications and are easily adjustable for different On/Off levels.For added protection, consider the addition of a back-up pump such as Liberty’s SJ10 SumpJet, as well as an alarm such as Liberty’s ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.CAUTION Do not let the pump run dry.
From the Manufacturer
Rugged and dependable heavy-duty cast iron pump with powder coat finish. Liberty’s “workhorse” sump pump features a unique one-piece cast iron body, 10-Foot quick-disconnect power cord. With a durable, epoxy powder coat finish and vortex style impeller, Liberty’s 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering. This sump pump is for sump pits no less than 10-Inch in diameter.
Conclusion
By our suggestions above, we hope that you can found 12 Hp Sump Pump Cast Iron for you.Please don’t forget to share your experience by comment in this post. Thank you!
