Nowadays, there are so many products of laundry tray pump 1/3 hp in the market and you are wondering to choose a best one.You have searched for laundry tray pump 1/3 hp in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings laundry tray pump 1/3 hp which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
934 reviews analysed
1. Superior Pump 92072 1/3 HP Pre-Assembled Submersible Remote Sink Drain Pump System
Feature
- Pre-assembled kit is ready to install and works great for laundry tubs, washing machines, wet bars and dehumidifiers
- 1/3 HP thermoplastic sump pump, handles 3/8 inch solids, vertical float switch
- Will handle temperatures up to 120 degree F
- 15-inch x 13.5-inch corrosion resistant structural foam basin with gasket sealed air tight cover
- 1-1/2 inch Inlet, 1-1/2 inch discharge, 1-1/2 inch vent and includes full flow check valve
Description
Product Description
The Superior Pump 92072 pre-assembled Remote Sink Drain Pump System is ready to install. This kit works great for laundry tubs, washing machines, wet bars and dehumidifiers. Complete kit includes sump pump, check valve, basin and basin cover. Pump Features: The 1/3 HP submersible sump pump will move up to 48 gallons of water per minute. This pump is made of corrosion resistant thermoplastic and includes an adjustable tethered float switch with piggy back plug to automatically turn the pump on/off. The pump offers a powerful, yet energy efficient (4.1 Amp) thermally protected motor for longer life and durability. Featuring a thermoplastic impeller, 1-1/2 inch FIP discharge and 10 foot, replaceable, water proof power cord. Sump pump has side inlets for increased water flow, will handle 3/8 inch solids and is equipped with a suction screen on the bottom. Pump is UL/CUL listed and CSA certified. Basin Features: The 6 gallon basin is constructed from corrosion resistant structural foam and includes a high quality molded reusable PVC seal. Pre-plumbed with a 1-1/2 inch discharge pipe and check valve this kit is ready to install and is backed by a 1 year warranty.
From the Manufacturer
Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70’s, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service – Superior Pumps Built to Last!
2. Simer 2925B Sump/Laundry Sink Pump
Description
Product Description
Sump/Laundry Sink Pump.
From the Manufacturer
Sump/Laundry Sink Pump.
3. Simer 2935B 1/3 HP Utility Sink Sump Pump
Description
Product Description
1/3 HP Utility Sink Sump Pump.
From the Manufacturer
1/3 HP Utility Sink Sump Pump.
4. Barnes 131411 Model SU33LT Preassembled Laundry Tray Sump Pump System with SU33 Pump, 1/3 hp, 120V, 42 GPM, 1-1/2" NPT Discharge
Feature
- SPLIT CAPACITOR MOTOR: For increased reliability, higher performance, longer motor life, great starting torque and lower amp draw
- HIGH CAPACITY PUMPING: Large 1-1/2″ NPT discharge
- Passes ½” spherical solids
- 3450 RPM
- Lifts water up to 30 feet
- ROBUST DESIGN: Stainless steel shaft and hardware
- Heavy duty industrial carbon/ceramic seal
- Oil lubricated ball bearings
- THERMAL PROTECTION: Automatic thermal overload protection prevents dangerous overheating and motor failure
- LIMITED WARRANTY: Purchase includes a 24-month limited warranty
Description
Barnes SU33LT Residential Laundry Tray System Including Barnes SU33 Sump Pump. Large 6 gallon capacity.
5. BURCAM 300514WHZ 1/3 HP Automatic Laundry Tub Pump, Black
Feature
- 1/3 HP AUTOMATIC LAUNDRY TUB PUMP: Designed for a maximum lift of 10′ (3. 0m) to handle normal waste water from domestic washing machines, bar sinks and all waste water not containing solids. Mounts directly to tail piece. Fits under wet bars, kitchenettes, vanities and utility sinks (complete self-contained unit).
- LAUNDRY TUB PUMP: Automatic switch starts motor when water enters into the pump body. Allows sink installation without breaking concrete.
- WATER PROOF DESIGN: 1/3 HP 115 V AC 60Hz Waterproof shroud protective cover to protect the pump from water damages.
- PUMP CAPACITY: Capacity up to 1, 400 GPH. Maximum water temperature 60 degrees C (140 degrees F).
- EASY TO INSTALL: No trap or inlet piping required. No vent connection required.
Description
Intended for permanent installation, this laundry tub pump is designed for a maximum lift of 10-feet to handle normal waste water from domestic washing machines, bar sinks and all waste water not containing solids.
6. Little Giant WRSC-6 Compact Drainosaur Tank and Pump Combination System
Description
Product description
WRSC-6 Hz / Volts / Cord: 60 Hz / 115 Volts / 8′ Cord Features: -Completely assembled and ready to be installed.-Intermittent Liquid Temp. up to 125 F.-Epoxy coated cast iron housing.-Polycarbonate Cover.-Polypropylene Volute.-Nylon Impeller.-Carbon/Ceramic Shaft Seal.-Upper and lower bearings.-Automatic Operation.-Diaphragm switch Activator.-Switch on – 4-7” / Switch off – 1-3”.-HP: 1/3.-Hz: 50/60 or 60.-Tank Size: 3.5 Gallons.-GPM at 5′ of Head: 45′.-Maximum Head at 18′.-FNPT Top Vent Port: 2”.-Top Discharge Port: 1.5”.-Side Discharge Port: 1.5”.
From the Manufacturer
WRS Series, a convenient smaller sized tank and pump combo, is ideal for impractical gravity drainage areas such as under sinks and laundry trays. Includes: tank and pump with 8-Feet power cord. 1/3 Horsepower, 46 GPM at 5-Feet head, 115 V, 60 Hz.
7. Jackel Pre-Plumbed Laundry/Sink Tray System with 1/4 HP Sump Pump
Description
Used to drain areas such as wet bars and laundry sinks.
8. Zoeller 105-0001 Sump Pump 12.50 x 14.50 x 14.50 inches 19 Pound
Description
Product Description
105-0001 Features: -Drain pump package. -No filters to clog or maintain. -P-trap can be installed internally for compact installations. -Allows drainage from areas where gravity is not present. -Can be used with dishwashers, laundry trays and garbage disposals. -1 Year warranty. -Dimensions: 12.5" H x 14.5" W.
From the Manufacturer
Removes water from areas where gravity flow is not available. Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal applications. Glass-filled, polypropylene base with built in strainer on M53. Passes laundry lint and 1/2″ spherical solids
9. WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Feature
- N/A
- Imported
- Assembled in the US with foreign and domestic parts.
- Tested to 1 million cycles*
- Mechanical float switch provides reliable operation and allows installation in sump basins 11″ in diameter or larger
- Top suction strainer filters debris and protects pump from clogging. The pump does not require weep holes and the cast iron seal plate prevents galvanic corrosion and leaks
- High capacity 1-1/2″ npt discharge
- Heavy duty oil filled motor for long life
- Cast iron pump housing for durability
Description
Product Description
1/3 hp, cast iron, submersible sump pump, with vertical switch, pumps up to 3800 gph at 0′, designed for 11 inch diameter or larger sump basin, top suction design filters debris & minimizes clogging, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 1/3 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups. The product is manufactured in china. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU790 features durable cast iron housing for long life and quiet operation. This submersible pump is compactly designed for 11″ or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1 1/2″ discharge allows easy installation plus maximum flow. Similar applications to the following brands of submersible sump pumps , Craftsman, Zoeller, Flotec, Water Ace, Myers, Little Giant, Liberty, Pit Viper, Ridgid, Blue Angel, Sta-Rite, Starite, Diamond, Star, Flint and Walling, Coleman, Maytag, Jacuzzi, ShurDri, Shur-dri, GSW, Teel, Master Plumber, UL listed
10. Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp
Description
Product Description
Zoeller Pump Co. M-53 Mighty Mate clear effluent or dewatering submersible pump. Choice of many plumbers and contractors. 1/3 HP cast iron housing with plastic vortex impeller.
9ft. power cord. Truely a all star pump. Powder coated epoxy CI and SS fastners. Oil filled motor with thermal overload. CSA UL SSPMA
From the Manufacturer
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
Conclusion
By our suggestions above, we hope that you can found Laundry Tray Pump 13 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!
