Top 10 Ge Gas Burner Tube Wb28k10024

Product Description

This is a genuine replacement part. The model number and name for the following item is: General Electric WB28K10024 Burner Tube.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: General Electric WB28K10024 Burner Tube

This is a Genuine Replacement Part, The Model Number and Name for The Following Item: General Electric (GENF0) WB34K10009 Burner Drip Bowl.

Product Description

This is a Genuine Replacement Part, The Model Number and Name for The Following Item: General Electric (GENF0) WB34K10010 Burner Drip Bowl.

From the Manufacturer

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WB34K10010 Burner Drip Bowl

Product Description

This is a Genuine Replacement Part, The Model Number and Name for The Following Item: General Electric (GENF0) WB29K10024 Surface Burner Cap.

From the Manufacturer

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WB29K10024 Surface Burner Cap

Product Description

This is a Genuine Replacement Part, The Model Number and Name for The Following Item: General Electric (GENF0) WB34K10013 Burner Drip Pan.

From the Manufacturer

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WB34K10013 Burner Drip Pan

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This surface burner head (part number WB16K10055) is for ranges. Surface burner head WB16K10055 distributes the gas through holes or slots to create an even flame across the cooking area. Shut off the gas supply and unplug the range before installing this part. Wear work gloves to protect your hands. For Hotpoint & Ge Profile.

From the Manufacturer

GE WB16K10055 Burner for Stove.

14″ cast iron gas log lighter (gas log lighter only) for natural gas only. The Real-Fyre log lighter is to be installed only in a solid-fuel burning fireplace with a working flue and constructed of noncombustible material. The chimney damper MUST be fully opened when operating this device. Adequate ventilation is absolutely necessary. Installation must be performed by a qualified professional service technician. Fireplace floor must be level, clean, and smooth.

INSTALLATION TIPS
✔ A listed gas valve (not included) must be installed upstream of the log lighter.
✔ The log lighter should be located such that the burner ports are horizontal, facing into the fire box, with the air shutter facing out toward the front
✔ Locate lighter to minimize flame impingement on the grate.
✔ Adjust the air shutter to give a sharp blue flame with yellow tips.
LIGHTING/OPERATION

• Make sure chimney flue and glass doors and screens are open.
• Fireplace should be clean of debris, as this could contain hot coals which could cause ignition if not disposed of properly. Ashes should be placed in a metal container with a tight fitting lid. The closed container should be placed on a non-combustible floor, and kept away from other combustible materials until the ashes have cooled.
• Make sure the log lighter gas valve is in the OFF position.
• Stack logs on the fireplace grate allowing an air space between the logs for quick lighting. Wait approximately five minutes before lighting.
• Make sure that shutter on mixing chamber is open to ensure that air and gas is being mixed. Flame should be blue.
• Light the burner by using a long fireplace match or lit paper under the center of the lighter near the burner ports.
• Turn the gas valve ON gradually until burner ignition occurs.
• If burner does not light within 5 seconds, turn valve off and wait 5 minutes before trying to relight.
• When log lighter is burning, close the fireplace screen. Do not close glass doors unless the wood in fireplace has been certified for use with log lighter with doors closed.
• When the wood fire is lit, the log lighter valve should be turned off. Failing to do so will cause wood to burn faster than normal. Remove gas valve key and place in a safe location.

Dante Products recognizes that fireplaces come in many shapes and sizes and are by no means: “One size fits all.” For this reason, our burner pipes are not only available in a variety of lengths to suite your installation needs, they can be purchased separately so you don’t have to purchase an assembled log lighter. Available in 17″, 24″, 30″, 36″ and 42″ lengths.

Take your home energy efficiency a step higher by using a Dante Universal Log Lighter. The Dante Universal Log Lighter features an energy conserving air/gas mixing chamber for efficient operation and is available in NG (natural gas) or LP (liquid propane.) The innovative air/gas mixing chamber allows for smooth, trouble-free lighting every time and the patent pending design can be easily converted in just minutes for either a straight or 90 degree angle installation.