Nowadays, there are so many products of aluminum heat sink cooling in the market and you are wondering to choose a best one.You have searched for aluminum heat sink cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings aluminum heat sink cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
677 reviews analysed
1. Senmod 2pcs Aluminium Heatsink Cooling Module, 90x90x15mm Heat Sink Cooler Fin for High Power LED Amplifier Transistor
Feature
- Product name: Aluminium Heat Sink.
- Reduce the risk of hardware failure due to overheating.
- The fins increase the area of the board and thus provide for greater heat transfer.
- Heat Sink Size: 90mm x 90mm x 15mm / 3.54″ x 3.54″ x 0.59″(L*W*H)
- Widely used for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
Description
Aluminum heatsink cooling fin, generally used in heat treatment and the cooling IC and electronic component.
The fins increase the area of the board and thus provide for greater heat transfer.
Specifications:
90mmx90mmx15mm Aluminum Heat Diffuse Cooling Fin Heatsink. Use heatsink adhesive glue to install heatsink. ( Glue is not included)
Material: Aluminum; Color: Sliver Tone
It can cool down the board and make your electronic equipment operate safely.
Reduce the risk of hardware failure because of overheating.
Please make sure that the size of the heat sink fits that of your component when you buy.
Package Included:
2pcs Aluminum Heat Sink
2. ESUMIC 20PCS 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin for Cooling MOSFET VRam Regulators VRM Stepper Driver
Feature
- 1. Type: 20 PCS 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin.
- 2.Aluminum Heatsink Color: Black
- Good Cooling,Easy Installation.
- 3. Heat Sink Size: 40mm x 40mm x 11mm / 1.57″ x 1.57″ x 0.43″(L*W*H)
- 4. 1 Pcs Heatsink Weight: Approx.18g
- 5. Package Content: 20PCS 40mm x 40mm x 11mm Black Aluminum Heatsink Cooling Fin.
Description
Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler, VRM, MOSFET, Regulators, VRAM, IC Chips, Stepper Motor Drivers, Miners,etc.
Specifications:
Material: Black Anodized Aluminum
Size: 40 x 40 x 11mm (L*W*H)
Package includes: 20 pieces heatsink.
Note:
Some scratches may be caused in the production process.
3. Lanpu 30 PCS Raspberry Pi Heatsink Kit Copper Raspberry Pi Aluminum Heatsink for cooling cooler Raspberry Pi 3, Pi 2, Pi Model B+
Feature
- Package includes 20 black anodized aluminum & 10 copper heatsink
- Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards
- Can be applied with other devices for cooling VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc
- Adhesive thermal tape backing, Raspberry pi not included
- These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
Description
30 PCS Raspberry Pi Heatsink Kit
Package Includes:
10 PCS Raspberry Pi black anodized aluminum copper heatsink, 0.56 x 0.56 x 0.27 inch (14 x 14 x 7mm (L*W*H)
10 PCS Raspberry Pi black anodized aluminum copper heatsink, 0.35 x 0.35 x 0.19 inch (8.8 x 8.8 x 5 mm) (L*W*H)
10 PCS Raspberry Pi copper heatsink, 0.59 x 0.59 x 0.02 inch (15 x 15 x 0.5mm (L*W*H))
Product Feature:
– These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
– These heat sinks kit can be applied in other devices to cool processor, regulators, VGA RAM, IC Chips, Mosfet SCR, Southbridge, Northbridge etc.
– Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards
– Raspberry pi not included
4. GKanMore Water Cooling Block Aluminum Waterbolck Cooler for CPU Graphics Radiator North Bridge Heatsink, 120x40x12MM
Feature
- ☞Material – Pure Aluminum water cooling block, lightweight, antirust, durable to use.
- ☞ Size – 120*40*12mm/4.7*1.57*0.47”.
- ☞ Good Leakproof and Heatsink – 7mm OD barb connector, connect the hose is more firm and not easy to fall off, the internal M-type flow channel, the hot and cold exchange area is maximized, and the heat dissipation effect is better.
- ☞Application – The aluminum waterbolck suitable for computer water cooling system for CPU graphics radiator north bridge heat sink, even applicable to industrial inverter driver,laser head cooling, industrial control cabinet cooling ,etc.
- ☞ Package Included – 1Pcs 120x40x12mm aluminum water cooling block for liquid water cooler heat sink system.
Description
GKanMore 120x40x12mm aluminum water cooling block which is lightweight, antirust, durable to use. It suitable for computer water cooling system for CPU graphics radiator north bridge heat sink, even applicable to industrial inverter driver,laser head cooling, industrial control cabinet cooling ,etc.
Material: Aluminum.
Color: Silver.
Size: 120*40*12mm/4.7*1.57*0.47”.
Package included: 1Pcs 120x40x12mm aluminum water cooling block.
5. ESUMIC 20PCS 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin for Cooling MOSFET VRam Regulators VRM Stepper Driver
Feature
- 1. Type: 20 PCS 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin.
- 2. Aluminum Heatsink Color: Golden
- Easy Installation.
- 3. Heat Sink Size: 40mm x 40mm x 11mm / 1.57″ x 1.57″ x 0.43″(L*W*H)
- 4. 1 Pcs Heatsink Weight: Approx.18g
- 5. Package Content: 20PCS 40mm x 40mm x 11mm Golden Aluminum Heatsink Cooling Fin.
Description
Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler, VRM, MOSFET, Regulators, VRAM, IC Chips, Stepper Motor Drivers, Miners, etc.
Specifications:
Material: Anodized Aluminum.
Size: 40 x 40 x 11mm (L*W*H)
Package includes: 20 pieces heatsink.
Note:
Some scratches may be caused in the production process.
6. Gadgeter 10pcs Aluminum Heatsink Cooler Circuit Board Cooling Fin For Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR , With 3M 8810 Heat transfer Peel and Stick Tape
Description
Specification :
10x Aluminum Heat Sinks
10x Thermally Conductive Heat Transfer pads (All Pad Are Not Pre Assembled .Assembly Required)
1 x Gift Cable Ties(charging cable does no include) every unit will receive one extra bonus if you don’t received please contact us we will send you the gift.
If for any reason you are unhappy with any product by GADGETER, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
7. Aluminum Heat Sink Heatsink Module Cooler Fin for High Power Amplifier Transistor Semiconductor Devices with Dense 19 pcs Fins 11.8"(L) x 5.51"(W) x 0.79"(H) / 300 mm (L) x 140 mm (W) x 20 mm (H)
Feature
- Made of high quality Aluminum, good thermal conductivity
- Reduce the risk of hardware failure due to overheating
- Maximize surface area Designed in contact with the cooling air. The 19 pcs fins increase the area of the board and thus provide for greater heat transfer
- Specially designed for high power household LED light or fish tank LED devices, etc
- Please make sure that the size of the heat sink fits that of your component
Description
A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device’s temperature at optimal levels. In computers, heat sinks are used to cool central processing units or graphics processors. Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as light emitting diodes (LEDs), where the heat dissipation ability of the component itself is insufficient to moderate its temperature.
Specifications:
100% Brand New High Quality
Material: Aluminum
Fins: 19
Size: 11.8″(L) x 5.51″(W) x 0.79″(H) / 300 mm (L) x 140 mm (W) x 20 mm (H)
Quantity: 1
Weight: 157g (approx.)
Package:
1x Aluminum Heat Sink Cooling Fin
Note:
1. Please check the specification table and make sure that the size of the heatsink fits that of your component. Thank You!
2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
8. Jun-Electron for Raspberry Pi 4 Model B Case, Dual Cooling Fan, Enclosure Aluminum Alloy Case with Heatsink Pillar
Feature
- Perfectly compatible with Raspberry Pi 4B ,Access to all ports for Pi 4. Not for Pi 3B+
- Passive Cooling Case with Heat Dissipation Design, Built-in three Heatsink Pillars to tightly touch with on-board raspberry pi 4 chipset. No More Overheating Problem
- Quiet dual fan without noise and great cooling performance, it can drop temp up to 30-37 degree
- Smooth and straight aluminum material, Ultra-thin design & Easy to install
- Strong metal case can protect your raspberry pi 4 from scratched, dust, damaged. High quality product and service Guaranteed
9. Aluminum Heat Sink Heatsink Module Cooler Fin Heat Radiator Board Cooling for Amplifier Transistor Semiconductor Devices Blue Tone 150mm (L) x 74mm (W) x10mm (H)
Feature
- Made of high quality blue anodized Aluminum , good thermal conductivity.
- Size: 5.9 x 2.91 x 0.39 inch / 150 x 74 x 10mm (L*W*H), please make sure that the size of the heat sink fits that of your component.
- This large big aluminum heatsink reduces the risk of hardware failure and power loss due to overheating, more safety.
- Maximize surface area Designed in contact with the cooling air. The 378pcs fins increase the area of the board and thus provide for greater heat transfer.
- Widely used for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.
Description
* Materials: Aluminum
* Color: blue
* Aluminum Heatsink Size: 5.9 x 2.91 x 0.39 inch / 150 x 74 x 10mm (L*W*H)
* Used for: Various mini DC converter circuit board, LED, Power IC, Transistor etc.
* A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device’s temperature at optimal levels.
* Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as light emitting diodes (LEDs), where the heat dissipation ability of the component itself is insufficient to moderate its temperature.
* Improve the environment (temperature around the device, as well as the flow rate of the air)
* Note:
1. Please check the specification table and make sure that the size of the heatsink fits that of your component. Thank You!
2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
Weight: 4.2 oz / 120 gr per piece
10. LED Aluminum Heatsink Heat Sink Heat Module Cooling Cooler Light Heat Sink for High Power Led Light 300 × 140 × 20MM
Feature
- ☆【Wide Application】The heat sinks 300mm module is perfect suitable for 8pcs 3W LEDs or 20pcs 1W LEDs, specially designed for high power household LED light or fish tank LED devices, etc. Perfect match to your electronic device, great solution for the problem of heat dissipation
- ☆【Reasonable Design】The Aluminum Heatsink is designed to maximize its surface area in contact with the cooling air. Mini size and compact, the heatsink cooling module won’t occupy too much space, carry it around easily with the convenience
- ☆【More Safe For Use】Heatsink cooling module can reduce the risk of LED light failure due to overheating, using electronic devices will be more safe. Light weight and used in applications where weight is a big concern
- ☆【Good Thermal Conductivity】Made of premium aluminum material, this led heatsink has good thermal conductivity, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
- ☆【What You Will Get】We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the LED Light Heatsink, please contact us by e-mail, we will try our best within 24 hours to reply
Description
Aluminum Heat Sink 300*140*20MM Cooling Heatsink for High Power LED Light
The heat sink is a passive heat exchanger that transfers the heat generated by an electronic device, thereby allowing regulation of the device’s temperature at optimal levels. This heat sink is used with high-power LED light, where the heat dissipation ability of the component itself is insufficient to moderate its temperature.
Specifications:
Material: Aluminum
Size: 300 × 140 × 20mm / 11.81 × 5.51 × 0.78″
Fins: 19
Quantity: 1
Weight: 570g(approx.)
Package Includes:
1 × LED Heat Sink
Conclusion
By our suggestions above, we hope that you can found Aluminum Heat Sink Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
