The Best Cooling Heat Sink 60

100% Brand new and high quality

Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous

applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.

Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts

Model: TEC1-12706

Size: Approx. 40mm x 40mm x 3.8mm

Voltage: 12V

Cooling power: Qcmax 60W

Tmax(Qc=0): up to 65°C

Operates Temperature: -30°C to 83°C

Power Cord: Approx. 25-30CM

These devices must be used in conjunction with a heat sink to avoid burned

Each device is full inspected and tested

Fitted with 6-inch insulated leads

Package Included:

5 x TEC1-12706 Thermoelectric Cooler

* Materials: Aluminum

* Color: blue

* Aluminum Heatsink Size: 5.9 x 2.91 x 0.39 inch / 150 x 74 x 10mm (L*W*H)

* Used for: Various mini DC converter circuit board, LED, Power IC, Transistor etc.

* A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device, thereby allowing regulation of the device’s temperature at optimal levels.

* Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as light emitting diodes (LEDs), where the heat dissipation ability of the component itself is insufficient to moderate its temperature.

* Improve the environment (temperature around the device, as well as the flow rate of the air)

* Note:

1. Please check the specification table and make sure that the size of the heatsink fits that of your component. Thank You!

2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding. 

Weight: 4.2 oz / 120 gr per piece

This set of cooler heat sink includes 10 different small to medium range sizes of heatsinks. It is totally composed of 100pcs of heatsinks including: Small anodized Aluminium: 20pcs 9mmx9mmx5mm, 8pcs 10mmx10mmx10mm, 8pcs 11mmx11mmx5mm; Medium anodized Aluminium: 8pcs 14mmx14mmx7mm, 8pcs 19mmx19mmx5mm, 8pcs 20mmx20mmx6mm, 2pcs 22mmx22mmx10mm, Silver Tone Aluminium: 20pcs 7mmx7mmx6mm, 10pcs 8.5mmx8.5mmx8mm, 8pcs 15mmx15mmx6.5mm (L*W*H). Can be used for cooling of variety of electrical components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators.

MASSCOOL 5C12B3 60mm Ball CPU Cooling Fan/Heat sink

Description:
Model: TEC1-12706
Size: 40mm x 40mm x 3.8mm
Operates from 0~15V DC and 0~5.8A
Operates Temperature: -55 to 83
Max power consumption: 65 Watts
Original box: NO
Net weight: 22g
Package weight: 31g
Color: White

Package Content:
2 x Thermoelectric Cooler

2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W

Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB

Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm

Aluminum heatsink cooling fin, generally used in heat treatment and the cooling IC and electronic component.
The fins increase the area of the board and thus provide for greater heat transfer.

Specifications:
90mmx90mmx15mm Aluminum Heat Diffuse Cooling Fin Heatsink. Use heatsink adhesive glue to install heatsink. ( Glue is not included)
Material: Aluminum; Color: Sliver Tone
It can cool down the board and make your electronic equipment operate safely.
Reduce the risk of hardware failure because of overheating.
Please make sure that the size of the heat sink fits that of your component when you buy.

Package Included:
2pcs Aluminum Heat Sink

Features :

Copper Heatsinks Cooling Fin for M.2 2280 SSD

Main Body Material: 100% copper, cut andpolished,High performance Thermal Heatsink;

Suitable for NVME M.2 SSD Laptop, AHCI M.2SSD and Sata-based M.2 SSD

Compatible PCIe NVMe M.2 SSD brand andmodels (List only part of them):

✔ Samsung: 850EVO / 860EVO / 960EVO /950PRO / 960PRO / SM951 / SM961 / PM951 / PM961 / CM871a / PM871 / PM981 /XP941

✔ Intel: 600P / 530 / 540S / PRO2500 /Optane Memory Module

✔ Kingston: SM2280S3G2 / RBU-SNS8152S3 /KC1000

✔ Plextor: M6GV / M7VG / M8PeGN / M8SeGN

✔ SanDisk: X300 / X300S / X400 / Z400S /X110 / A400

✔ Transcend: MTS800 / MTS820

✔ ADATA: SP550 / ASX7000NP / XPG-SX6000 /XPG-SX8000 / XPG GAMMIX S10 / SU800 / AXNS381E

✔ Apacer: AST280 / Z280 / AS2280

✔ Toshiba: Q200 / XG3 / XG4 / OCZ RD400 /THNSNK / OCZ: RD400

✔ Crucial / Micron: MX200 / MX300 / M510 /M600 / 1100

✔ WD: WD Green M.2 / WD Blue M.2 / WDBlack M.2

✔What including :

2 x M.2 SSD HeatSink(Copper)

2 x m.2 thermal pads(0.5mm/1mm)

6 x Rubber Rings

6 x High temperature insulation sticker

2 x Wipes(1 wet and 1 dry)

Application: Various mini DC converter circuit board computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.

Specifications:
Product name: Aluminum Heat Sink
Material: Aluminum; Color: Black
Size: 25 x 25 x 11mm/ 0.98 x 0.98 x 0.43 inch (L* W* H)
It can cool down the board and make your electronic equipment operate safely.
Reduce the risk of hardware failure because of overheating.

Note:
1. Please check the specification table and make sure that the size of the heatsink fits that of your component.
2. Please allow 1-3mm error due to manual measurement.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Package Included:
20pcs Aluminum Heat Sink

Includes 2 pieces black anodized 60mmx60mmx10mm aluminum heat sink