582 reviews analysed
1. Heat Cable for Pipe Freeze Protection, 24 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt
Feature
- THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.
- AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Email us at [email protected]
- TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
- HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
- USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more
- can be exposed directly to water and is rated for soil contact.
Description
THIS CABLE WILL NOT WORK unless it is in a cold environment. We’ve received a couple bad reviews because people ‘tested’ the cable in their warm living room. Eye roll. Please don’t be that guy. The built-in thermostat will NOT TURN THE CABLE ON unless it is in a cold environment. Now for the good news, this kit includes 16 feet of high temperature glass cloth tape for installing your cable. Pipe Freeze Pro is a commercial-grade, self-regulating heat cable which provides years of reliable freeze protection for pipes of all varieties, including copper, steel, PVC, ABS, PEX and more (pipe diameters up to 2”). It may also be used in drains and culverts through the winter months to promote drainage. Don’t buy from companies without a human available by phone. Heat cable is technical stuff and it’s great to have solid advice on how to install it. We are the only heat cable seller on Amazon who is a simple phone call away. Eat that off shore competitors! Pipe Freeze Pro is jacketed with a commercial-grade fluoropolymer and comes standard with a flame-retardant thermoplastic interior jacket. Our 16 gauge heating wires are 200% thicker than the conductors found in cheap, constant wattage cables like EasyHeat and Frost King. Thicker conductors mean greater heating efficiency, more melting power and long term cable integrity. Pipe Freeze Pro is self-regulating, meaning it ‘asks’ for more energy as it gets colder outside and less energy when it’s warmer. The entire length of our cable is temperature sensitive such that colder areas demand more power than warmer areas. Smart stuff. The stated cable length DOES NOT include an additional 24” unheated cold lead. For example, a 6 foot cable is 6 feet plus 2 feet of unheated cord. Installation is simple. Run Pipe Freeze Pro along the pipe, secure with fiberglass cloth tape (included) every 12 inches and wrap with standard pipe insulation. Read the manual for full instructions, of course.
2. Frost King HC12A Heating Cables, 12 Feet, Black
Description
Frost King HC12A Heating Cables, 12 Feet, Black
3. Frost King HC30A Heating Cables, 30 Feet, Black
4. EasyHeat 2102 Freeze Free Heating Cable – 100′
Feature
- Self-regulating pipe heating system
- Provides flexible protection against pipe freeze-ups in even the most challenging applications
- Reduces power consumption when the pipe does not require freeze protection
- Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
- Length: 100′ and rugged metal braided jacket provides an electrical ground as well as protection against damage
Description
EasyHeat Freeze Free self-regulating pipe heating cables provide flexible protection against pipe freeze-ups in the most challenging applications. The cut-to-length technology is ideal for installations that require protection of numerous pipes of varied lengths. The self-regulating effect of the cable reduces power consumption when the pipe does not require freeze protection. They are ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures; water supply lines underneath manufactured homes; and cottages, barns and outbuildings that are not regularly used.
5. BriskHeat HSTAT101004 XtremeFLEX HSTAT Silicone Rubber Heating Tape With Adjustable Thermostat Controller, W x L: 1 x 48-Inch, 120VAC
Description
Silicone rubber heating tape with adjustable controller, 1″ x 4′ heating tape, 288 watts, 120VAC, thermostat adjustable between 50F to 425F, maximum exposure temperature of 450F, moisture and chemical resistant, 6-foot power cord with plug.
6. HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black
Feature
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
- Copper
7. 3M 3311 Silver Aluminum Foil Tape – 2 in. x 5 yd. Vapor Resistant Rubber Adhesive Foil Tape Roll. Adhesives and Tapes
Feature
- Adhesive Tape: this foil tape with aggressive rubber adhesive sticks well to most surfaces. The vapor shielding tape also adheres to irregular surfaces, irrespective of the weather conditions
- Applications: the silver aluminum tape can be used for shielding, patching, seaming, and sealing to protect the materials from moisture, heat, odor, and chemical transmission. It is ideal for use in repair tasks
- Temperature Friendly: the odor resistant tape meets American UL-723 standards for flame spread and smoke. The rubber adhesive tape dissipates excess heat and ensures heating and cooling efficiency of sensitive materials
- Multipurpose Tape: this adhesive foil tape works suitably well in general, commercial, and industrial applications. It can be used for aluminum seams and joints, sheet metals, fibrous and metal ducts, and aluminum backed duct boards
- Specifications: this silver foil tape measures 2 in. in width, 5 yd. in length, and weighs 0.32 oz. The paper-lined tape can sustain -10 deg. – 180 deg. temperature
Description
3M Silver Tape is backed with aluminum foil and rubber adhesive for sticking perfectly to the surfaces. The aluminum backed tape features a high-tack, pressure sensitive adhesive that bonds equally with regular, irregular, smooth and powder-painted surfaces. This silver tape is ideally used for patching and seaming tears in sheet metals, metal ducts, aluminum backed fiberglass and thermal insulation systems. Insulation tape has high heat reflectivity and thermal conductivity features to protect heat-sensitive apparatus from vermin, high and low temperatures, moisture, and fire smoke. The 5 yd. long and 2 in. wide heat-reflective tape can be used in all weather conditions.
8. Wostore 16 Ft. Copper Pipes 1/4&3/8 Inch 3/8" PE for Mini Split Air Conditioner Insulated Coil Line Set HVAC with Fittings
Feature
- All in one kit: 16Ft. insulated line set*1,wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1, flexible condensate drain hose*1, matching length interconnecting cable(18Ft., 16/4)*1.
- 16 Ft. insulated high quality seamless copper tube showing no leaks, high and low pressure lines. 1/4″ & 3/8″ OD for mini split air conditioners.
- Excellent UV resistant: The insulated copper twin line set has been successfully tested by method ASTM G154.
- Insulated with climate resistant foam for durability,1/2 inch thickened insulated cotton.
- Factory flared with 410A fittings attached, copper coil line set for ductless mini split air conditioner and heat pump systems insulated pre-flared with nuts.
9. Thermwell Products HC18 Pipe Heat Cable 18 ft.
10. HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
Feature
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
Conclusion
By our suggestions above, we hope that you can found Copper Pipe Heating Tape for you.Please don’t forget to share your experience by comment in this post. Thank you!