Finding your suitable readers for extruder cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for extruder cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
969 reviews analysed
1. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
Feature
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
Description
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Specification:
Rated Voltage: DC 12V
Consuming Current: 0.08A
Connector: 2pin-ph2.5
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Notice!!!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
2. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
3. Aibecy 4010 Brushless Blower Cooling Fan Turbo Fan 40 40 10mm 24V DC with Ball Bearing 2Pin Connector for CR-8S Ender 3 3D Printer Hotend Extruder
Description
Features:
DC 24V 0.1A operation voltage, fit for CR-8S Ender 3 3D printer extruder.
2Pin connector, wire length approx. 100cm / 39.4in.
Waterproof , dust-proof and super noise-reduced.
Easy installation and high-efficiency heat dissipation,
Extend the life of your 3D printer, best accessory for you.
Specification:
Volume: 4010
Compatibility: CR-8S/ Ender 3
Noise: 20dBA
Speed: 7600 r/min
Connector: 2Pin
Bearings: Oil-bearing
Cable Length: Approx. 100cm / 39.4in
Rated Power: DC 24V 0.1A
Item Body Size: 4 * 4 * 1cm / 1.6 * 1.6 * 0.4in
Item Weight: 16.5g / 0.6oz
Package Size: 13 * 9 * 1cm / 5.1 * 3.5 * 0.4in
Package Weight: 18.7g / 0.7oz
Package List:
1 * Blower Fan
4. Antrader 4010 24V 2 Pin Brushless DC Cooling Fan 40 x 40 x 10mm for DIY 3D Printer Extruder Humidifier 6-Pack
Feature
- High quality mini brushless 4010 DC 24V fan, sleeve-bearing design cooling cooler.
- Plastic construction 9 blade fan. Dual Ball Bearing
- Speed: 6800 RPM
- Air Flow : 6.86 CFM
- DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.12A
- 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
Description
The Best Product to Save Your Time and Money!
Specifications:
Model: 4010
Rated Voltage: DC24V
Consuming Current : 0.12A(0.15 Max.)
Consuming Power: 1.2W(1.44 Max.)
Connector: 2pin-ph2.5 Rated
Speed: 6800 PRM
Iife Expectance: 67,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: FCC,CE
Acoustic Noise: 18db***
DC Line Length : 120mm Max.
Air Flow: 68.6CFM
Size:40 x 40 x 10mm/ 1.57″ x 1.57″ x 0.39″
Package Content:
6pcs x DC Brushless Cooling Fan
Notes:
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.
5. 3D Printer Ender 5 Full Assembled Extruder Kit 24V with 2pcs Cooling Fans / 5pcs 0.4mm Nozzles for 3D Printer Ender 5 / Ender 5 Pro
Feature
- Ender 5 Pro Metal Assembled Extruder Kit with a full mental jacket, stable running, and high precision.
- Ender 5 Pro Full Hot End whcih cooling and heating system with high quality.
- 3D printer extruder with high quality of teflon tube,thermistor and heating tube
- International brass nozzles 0.4mm.
- CR-10S Pro Extruder , voltage is 24V 40W
- The CR-10S Pro Full Metal Extruder Hotend only fits for 3D Printer CR-10S Pro. Please do not use it for another brand 3D printers.
Description
3D Printer Parts -Creality Ender 5 Pro Full Assembled Extruder Hot End Kit with 5 Piece 0.4mm Nozzles for Ender 5 / Ender 5 Pro 3D Printer
Installation type: external thread connection.
Scope of application of 3D Printer Extruder Hot End Kit: Creality 3D printer Ender 5 /Ender 5 Pro.
Nozzle size: 0.4mm (also suitable for 0.2mm 0.3mm 0.5mm mk8 nozzle) Operating temperature
range: -40~+260°C (-40~+500°F).
Material: Aluminum / Stainless Steel / Brass.
Throat pipe length: 30mm.
Aluminum block size: approx. 20 x 20 x 10mm.
Thermistor and heater cable length: 1.3 meter.
Package of 3D Printer Extruder Hot End Kit:
1pc x Aluminum Block.
1pc x Heating Tube (length of heating tube is 1.3 meter, 24V 40W).
1pc x Brass Nozzle (0.4mm).
1pc x M6*30mm Throat Pipe (built-in Teflon).
1pc x Thermistor / Brass sleeve
2pcs x Cooling Fans.
5pcs x 0.4mm Nozzles
6. 4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)
Feature
- ✹✹ Power Connection: 2 Pin-ph2.5
- Low noise while cooling the hot end of heatsinks.
- ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
- ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
- ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).
7. Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 3D Printer
Description
Specification:
Type: 4010
Materials: Plastic
Bearings: Oil-bearing
Operation Voltage: DC 24V
Fit For: Creality Ender 3, Ender 3X, Ender 3 Pro
Weight: 0.078KG
Package Included:
1x DC 24V Extruder Hot End Fan
1x DC 24V Turbo fan
8. WINSINN 24V 40mm Fan Blower for Cooling Creality Ender 3 / Pro Turbine Turbo 40x10mm 4010 DC Brushless Hydraulic Bearing, with Air Guide Parts – High Speed (Pack of 4Pcs)
Feature
- ✔️Hydraulic Bearings – High Speed version
- ✔️High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
- ✔️for Cooling Creality Ender 3 / Pro , Rated voltage: DC 24V
- ✔️4010 Blower Fan + 40mm Fan + Air Guide Parts
- ✔️Made by WINSINN.
Description
►Hydraulic Bearings – High Speed version
►High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
►For: Cooling Creality Ender 3 / Pro
►Size: 40x40x10mm
►Rated voltage: DC 24V
►With 2 x Air Guide Parts :))
—————————————————————————————————————
Package include:
►2 x High Speed 4010 24V Hydraulic Bearings Blower Fan
►2 x High Speed 40mm 24V Hydraulic Bearings Fan
►2 x Air Guide Parts
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
9. Dorhea 30x30x10mm 12V Fan DC Brushless Cooling Fan 3010 DC 12V for DIY 3D Printer Extruder Hotend V6 V5 CPU Arduino Humidifier 2Pin (4 PCS)
Feature
- High quality mini brushless 30 x 30 x 10mm DC 12V fan, 3010 fan cooling cooler.
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.15A
- Noise: 24DBA.
- Connecter: 2 terminal connector with 2pin-ph2.5.
- Compact motor design for computer case 30mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
- Plastic construction 5 blade fan. Speed: 9000 + -10% RPM
- Wind Speed: 2.5M/S, Wind Volume: 2.8CFM
Description
Specifications:
Size:30x30x10mm
Rated Voltage:DC12V
Speed: 10000RPM
Air flow: 3.95CFM
Noise:26dBA
Connector: PH2.0-2Pin
Life: 35000 hours
Package Include:
4X12V 2Pin DC Cooling Fan
10. SIMAX3D DC 24V Cooling Fan,40x40x10mm 4010 Brushless Axial Flow Fans for 3D Printer Extruder Hotend,Computer Case,Humidifier and Other Small Appliances 【4 Pcs/Pack】
Feature
- Low noise: Noise is measured rated voltage in free air in anechoic chamber with B&K Sound level meter with microphone at a distance of one meter from the fan intake. The background noise is 18dBA max.
- Applications: suitable for hot-end cooling, printer or other cooling requirements, such as: B. small heat-dissipating communication equipment, PC CPU server, cooling capacity, etc
- Precision Bearings: high precision, long life, low noise bearings, high temperature resistance, stable operation, long service life
- Eco Materials: Choose safe and reliable environmentally friendly materials.
- Warraty service: All SIMAX3D fans have 12 months of after-sales service. If you have any questions, please feel free to contact us by email. We will refund you within 360 days.
Description
Dimensions: 40mm x 40mm x 10mm
Working voltage: 24V DC;
Working current: 0.1A;
Air volume: 5.75 ± 10% CFM;
Power: 0.96w;
Cable length: 100cm;
Certification: CE, UL, CUL;
Feature:
Oil-containing 30,000 hours;
Working Temperature: -10 ℃ to + 70 ℃;
Test Long Life: With 80℃ operating temp and power on, the min life is 1000 hours
Ultra-quiet low-speed brushless DC fan;
high-quality plastic casing; quiet bushing design.
Strong wind: 2Pin DC cooling fan, high-strength fan blade design adopts strong wind pressure, and concentrates the airflow by providing the machine with a strong airflow to make it cool normally.
Interface type: XH2.54-2P, cable length: about 100 cm
Dimensions: 40x 40x 10 mm
Working voltage: DC 24V, please purchase according to need
Notice:
1 Please do not touch the impeller and never carry the fan the lead wires. The bearings and the lead wires may be damaged.
2 For the purpose of MIS, please specify the Model No. on every order.
3 Please do not use the fan in the environment of corrosive gas or liquid.
4 Please do not store the fan in the environment of high humidity. Please avoid storage of the fan over 6 months . For long term storage,
please connect power to the fan shortly every 6 months even through the fan is stored in room temperature.
5 While the fan is in operation, please do not lock the fan intentionally for a long period of time to prevent over heating which may cause permanent damage.
Packing List
4 * cooling fans
4 * 1M Cables
Conclusion
By our suggestions above, we hope that you can found Extruder Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
