802 reviews analysed
1. Square D by Schneider Electric D223N 100-Amp 240-Volt Two-Pole Indoor General Duty Fusible Safety Switch with Neutral
Description
Product Description
The Square D by Schneider Electric 100 Amps 240 Volts 3 Pole General Duty Indoor Safety Switch is designed for residential and commercial applications where durability and economy are prime considerations. Typical loads are lighting, air conditioning and appliances. This switch is suitable for use as service entrance equipment when equipped with a service grounding kit. The switch is UL listed, File E2875 and meet or exceed the NEMA Standard KS1. For more than 100 years the Square D brand safety switch has been the unchallenged leader in the market. We’ve continued our tradition of innovation, developing new features that provide an unsurpassed level of performance, reliability, safety and ease of installation. This tradition has resulted in the Square D brand being preferred two to one over our closest competitor.
From the Manufacturer
WARNING: This product can expose you to chemicals including DINP which is known to the State of California to cause cancer and DIDP which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
2. Connecticut Electric THQL1130 Circuit Breaker, 30 amp, Black
Description
Product Description
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type thql – 1 per pole. may be used, when marked to accept, with American switch, arrow Hart, Bryant, general switch, gte, sylvania, most item, Murray, Westinghouse type br, Challenger and Crouse-Hinds. 15 to 30 Amp 14 – 8 cu or 12 – 8 AL AWG wire, 35 to 60 amp 8 – 3 cu or 8 – 2 AL AWG wire. Ul listed, Hacr rated. 1 module, 120/240 volt; 10, 000 air.
From the Manufacturer
This 120 volt GE 30 amp, single pole, thick series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 2,200 watts, include kitchen circuits, branch circuits, wall receptacles, electric heaters (up to 1,650 watts), dishwashers, refrigerators, freezers, washing machines, window air conditioners (110V, up to 5,500 BTU) and electric motors (3/4 hp to 1-1/4 hp). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.
3. Leviton 8829-CW1 VA-HP008 EMW3217171, Pack of 1, White
4. Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
Description
Product Description
Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
From the Manufacturer
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
5. Q120 20-Amp Single Pole Type QP Circuit Breaker
Feature
- N/A
- Made in USA or Imported
- Single pole, 20 Amp, 120V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
The Parallax ITEQ120 One-Pole Circuit Breaker requires a one 1″ space. HACR SWD Rated. 120/240VAC 10,000 AIC. Dimensions: 2.56″ H x 1″ W x 2.88″ L.
From the Manufacturer
Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The single pole Siemens breakers may be used in single or 3-phase load centers and are 120V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.
6. GE Lighting 19382 Halogen Double-Ended Halogen T3, 500-Watt
Description
Product Description
GE halogen bulbs deliver crisp, white light. This unsurpassed light quality is ideal for adding depth, drama and interest to any room or space. Use GE halogen specialty bulbs to create a dramatic effect.
From the Manufacturer
GE 19382 Halogen Double-Ended Quartz T3 500-Watt 19382 – Q500T3/CL/CD 5PK GE Quartz T2.5 – Special Service protect and beautify your home. GE ‘s specialty Bulb s offer innovative solutions for a variety of lighting needs. Uses Halogen technology for a brighter, crisper light Bulb T2.5 Base: Recessed Single Contact (R7s), Wattage: 500 Voltage 120 Initial Lumens 11100 Color Temperature 3000 K, Rated Life: 2000 hours, Product Code: 19382, Description: Q500T3/CL/CD 5PK, UPC: 043168993807 . The Primary Application: Special Service; Motion-Sensing & Security . Halogen lamps provide a small, white light source with excellent color rendering. Unlike standard incandescent lamps, halogen lamps use a halogen gas which allows the bulbs to burn longer without sacrificing light output. Compared to incandescent lamps, halogen lamps provide crisp white light, excellent beam control, compact size, high lumen maintenance, and a longer life.
Conclusion
By our suggestions above, we hope that you can found Ge Specialty Breakers 220 110 Split Breakers for you.Please don’t forget to share your experience by comment in this post. Thank you!
