The Best Hard Drive Enclosure With Cooling Fan

The Sabrent ec-dffn SATA lay-flat docking station supports the direct insertion of desktop 2.5″/3.5″ Sata hard drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the Lightning speed of USB 3.0 To quickly transfer files up to 5 Gbps!

keep your drives running cool, with built-in cooling fan
The docking station features a built-in cooling fan that provides increased reliability and lifespan to HDD by keeping the drives cooler.
* supports standard desktop 2.5″”/3.5″” Sata hard drives.
* supports hard drives up to 6TB.
* on/off power switch.
* LED light indicates power and activity status.
* hot-swappable, plug and play, no drivers needed.
* reverse compatible with USB 1.1 & USB 2.0.
* transfer rates up to 5 Gbps w/USB 3.0
* transfer rates up to 480 Mbps w/USB 2.0

system requirements:
* available USB 3.0 for high speed data transfer
* Windows: 2000/XP/Vista/7/8 (both 32-bit & 64-bit versions)
* Mac: OS X

package contents:
* Sabrent ec-dffn lay-flat docking
* power supply
* USB 3.0 cable
* user manual

Thermaltake Max5G Hard Drive Enclosure Active Cooling With Two 80mm Blue LED Fans USB 3.0 5.0 Gbps

The Sabrent SATA Hard Drive Docking Station enables you to access SSDs and 2.5" hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2.5" SATA hard drive directly into this docking station, you can quickly access drive contents and transfer files. Transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps.

Features

Read and write four hard drives simultaneously.
Plug and Play
Tool-free installation
Built in fan
Read and write up to four hard drives at speeds up 5Gbps

System requirements:
Available USB 3.0 for high speed data transfer Reverse compatible with USB 1.1 & USB 2.0.
Windows: 7/8/8.1/10 (Both 32-bit & 64-bit versions)
MAC: OS X

Package Contents:
Sabrent DS-4SSD Hard Drive Dock
Power Supply
USB 3.0 cable
User Manual

ineo believes protection is never enough for your precious data in your M.2 NVMe SSD, so we introduce a best cooling enclosure 2598NVMe with transfer in USB 3.2 Gen 2 10Gbps ultra fast speed.

Features:
1. Ultra fast 10Gbps USB 3.1 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
2. Bundled with silicone thermal pad for better cooling down during high speed transfer
3. Supports Hot-swapping, plug and play function, instant connection when plugged to PC.
4. Built-in silent fan for positive heat dissipation, 3.3V 6000 RPM, smart active when temperature is over 45 degree centigrade

System requirements:
Windows: 7, 8, 8.1. 10 (Both 32-bit & 64-bit versions)
MAC: OS X

Package Contents:
1 x ineo C2598 Rugged Aluminum M.2 NVMe SSD Enclosure
1 x Screws Kit
1 x Silicone Thermal Pad
1 x User Manual
1 x Guarantee Card

Internal Interface：M.2 M-Key
External Interface：USB3.1 Gen2 Type-C
Control chip：ASM2362(10Gbps)
Support SSD：M.2 NVMe SSD
Transfer Speed：USB3.1 Gen 2 10Gbps(Theoretic)
Supported OS：Windows/Linux/Mac
Product material：Aluminum alloy + stainless steel
Cable length：24cm/9.44 inches
Adapter：USB Type-A to C adapter

Compatibility Note on NV-C01:
● The adapter fits NVMe PCIe M.2 ONLY!
● NVMe come in ‘M’ or ‘B+M’ key, however, many SATA NGFF also come in ‘B+M’ which is NOT supported. You can NOT classify a ‘B+M’ disk by ‘KEY’ form. Do a research and make sure it is ‘NVMe’
● The card reader does NOT fit SATA NGFF, PCIe AHCI, mSATA or SSDs pulled from Apple Mac
● Some rare disks come in multiple editions with different interface, for example Samsung SM951 (NVMe and AHCI are available)
● Not fit AHCI disks like Samsung XP941, SM951 MZ-HPV256/512. (*SM951 MZ-VPV5120/2560 are supported for they’re NVMe)
● The caddy will heat up since NVMe produce a lot of heat

– Newest NVMe PCIe to 10Gbps USB3.1 Gen2 Adaptor
– Two 10Gbps USB Type-A and Type-C Cables included
– Premium Aluminum Case with Excellent Cooling Effort
– 2280, 2260, 2242, 2230 form factor; ‘M’ and ‘B+M’ Key
– Thermal Silicon Pad Design – Excellent Heat Dissipation
– Compatible with multi-OS: Windows 7, 8, 10 & Mac OS
– Comply with Trim, UASP, Power Saving and Plug & Play

Tested NVMe:
‘M’ Key:
Samsung 950 Pro, PM951, PM961, PM981, SM961, 960 970 EVO Plus Pro, WD Black SN750, ADATA XPG SX8200 and SX6000 Pro, Corsair Force MP510, Crucial P1, Sabrent Rocket, Silicon Power P34A80, Intel 600P, 660P, 760P, 900P, Patriot, SK Hynix, Kingston KC1000, Mushkin Pilot, HP EX900, EX950, Pioneer APS-SE20G, addlink S70
‘B+M’ Key:
Kingston A1000, Corsair MP300, WD Blue SN500, Lexar NM520, Toshiba OCZ RC100, Intel Optane 800P, LITEON T11 Plus and NVMe pulled from notebook like Lenovo SL700, ST8000

Packaging:
1* ElecGear NV-C01 (105*45*14mm, 135gram)
1* USB A2C Cable
1* USB C2C Cable
1* PH0 Screwdriver
(Internal Memory is NOT included!)

Easily upgrade the HDD capacity of the Xbox One. The Data Bank for the Xbox One allows the use of an external 3.5” hard drive* in addition to the stock 2.5” hard drive that comes pre-installed in the system. 3.5″ drives are less expensive at higher memory capacities than the 2.5″ drives commonly found in standard external hard drives. The unit also includes a front facing LED indicator which illustrates when the Xbox One is saving or accessing content on the hard drive. The Data Bank is powered by its own dedicated power cable to run the 3.5″ hard drive.

Installing the Data Bank is easy and takes only a few minutes. Simply attach the Data Bank to the top of the Xbox One and plug the USB cable into the back of the console. The USB connection allows the Xbox One to access the data stored on the 3.5″ HDD. Slide any 3.5″ drive into the Data Bank and attach the drive cover. Once the drive is properly installed, plug the Data Bank in to any wall outlet via the provided power cord and turn on your system.

With the Data Bank installed the Xbox One’s storage capacity can easily be augmented by installing most 3.5″ hard drives, drastically increasing the amount of games and save files that can be stored on the system.

Please Note: Data Bank is not compatible with Xbox One S

The Gen 3 Speedbyte Nvme Enclosure Have Combinated Tool-Free And Bulit-In Slient Fan Function In One Device. No More Screws And 100% Tool-Free. Aluminum Alloy Shell And Bulit-In Fan Can Achieve 3X Heat Dissipation Effect Of Other Ordinary Ssd Enclosures.

Features:
1. Ultra fast 10Gbps USB 3.1 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
2. Bundled with silicone thermal pad for better cooling down during high speed transfer.
3. Supports Hot-swapping, plug and play function, instant connection when plugged to PC.
4. Built-in silent fan for positive heat dissipation, 5V 6000 RPM, smart active when connecting to PC or mobile phone.
5. 1-2 minutes of intelligent sleep.

Internal Interface：M.2 M-Key
External Interface：USB3.1 Gen2 Type-C
Control chip：JMS583(10Gbps)
Support SSD：M.2 NVMe SSD 2280, 2260, 2242
Transfer Speed：USB3.1 Gen 2 10Gbps(Theoretic)
Supported OS：Windows/Linux/Mac
Product material：Aluminum alloy shell+ stainless steel + Built-in silent fan PCB
Cable length：22.5cm/9.44 inches
Adapter：USB Type-A to C adapter

System requirements:
Windows: 7, 8, 8.1. 10 (Both 32-bit & 64-bit versions)
MAC: OS X
Linux

Package Contents:
1 x Speedbyte Gen 3 NVMe enclosure(TOOL-FREE & Bulit-in slient Fan)
1 x USB 3.0 (Type-A) cable
1 x USB Type-C cable
1 x Portable rope