761 reviews analysed
1. Rheem SP20060 Electric Water Heater Tune-Up Kit
Description
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
2. Camco 02482/02483 1650W 120V Screw-In Water Heater Element – High Watt Density
Description
Product Description
1650W, 120V, Water Heater Screw-In Element, Use For 6 Gallon Water Heaters.
From the Manufacturer
Camco’s 1650W 120V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
3. ZERO EWH-01 Electric Water Heater Tune-Up Kit, T-O-D style, Universal for Water Heater
Description
Universal for all type water heater. 120V ~ 480V Contains all the parts needed to repair or renew an electric water heater. Includes 2 each high watt density elements, 1 TOD style lower thermostat with protector #KSD200（https://www.amazon.com/KSD200-Electric-Thermostats-Single-Recognized/dp/B07CNJNDQY/ref=sr_1_16?keywords=AMATACH&qid=1553507108&s=gateway&sr=8-16）, 1 TOD style upper thermostat with protector #KSD203（https://www.amazon.com/KSD203-Heater-Thermostats-Element-Recognized/dp/B07CP1H1X6/ref=sr_1_19?crid=UF8B2F62NY8T&keywords=water+heater+thermostat&qid=1553506518&s=gateway&sprefix=water+heater+th%2Caps%2C325&sr=8-19）.
4. Camco 02583 4500W 240V Screw-In Foldback Water Heater Element – Low Watt Density
Description
Product Description
02583 Wattage: 4500 Features: -Screw-In Element.-Element comes with one gasket.-Carded.-8″ Minimum tank diameter.-150+ Watts per square inch. Specifications: -1500W Voltage: 120.-2000W Voltage: 240. Dimensions: -Dimensions: 14.5″H x 3.63″W x 1.75″ D.
From the Manufacturer
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
5. Camco5" Residential Screw-In Water Heater Element Wrench – Fits All Standard Screw In Elements (09883)
Feature
- 5″ long Zinc plated water heater element wrench
- Compatible with all standard screw-in elements and 1-1/2″ hex on residential screw-in water heater elements
- Cross holes allow you to use a screwdriver for enhanced torque and to help remove and install element with ease
- Fits into offsets where an adjustable wrench can’t
- For use with residential water heaters
6. Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Description
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
7. Rheem SP10874GH Resistored Copper with Screw-In 120-volt/2000-watt Element
Description
Product Description
The Rheem SP10874GH is an element – 120V/2000W copper resistored HWD – 1-inch screw-in. Watt Density Classification: HWD. Input Voltage (V): 120. Wattage at 120V (W): 2000. Watt Density at 120V (W/sq. in. ): 170. Cold Resistance (ohms): 7.20. Outer Sheath Material: Copper. Resistored: Yes. Configuration: Straight. Element Diameter (in.): .260. Element Length – Flange to Tip (in.): 7.65. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-9/32. Nominal Thread Size – (in.): 1. Threads per Inch: 11-1/2. Thread Type Series Designation: NPSM. Hex Head Size – Across Flats (in.): 1-1/2.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
8. Eastman 45058 Heavy-Duty Steel Water Heater Element Wrench
Feature
- MATERIAL: This water heater element wrench is made of high-quality, heavy-duty steel which provides strength and endurance
- DURABLE: The sturdy steel of this element wrench is chrome plated which provides extra durability making it last longer
- COMPATIBILITY: This water heater element wrench is universal which fits most standard screw-in elements
- CONTENT: This package includes 3/4 inch to 1/2 inch drive adapter
- EASE: This wrench makes replacement and installation of screw-in water heater elements quickly without hassle
Description
Product Description
The Eastman 45058 Water Heater Element Wrench is made of high-impact heavy-duty steel which gives strength. The steel has a chrome finish which gives a modern look to the heater element socket also providing durability making it extremely long-lasting. The kit also includes 3/4 inch to 1/2 inch drive adapter.
USE :This water heater element socket is a must for every household as it lets you replace and install screw-in water heater elements quickly and easily without any hassle. It can be fitted on almost all standard screw-in elements. A modern design with efficient quality.
From the Manufacturer
Eastman’s Heavy-Duty Water Heater Element Wrench helps remove and replace residential screw-in water heater elements quickly and easily. Made of chrome plated steel for durability and strength. Includes a 3/4″ to 1/2″ drive adapter.
9. Rheem SP10869PH Screw-In 240-volt by 5500-watt Element, Premium Resistored Stainless Steel
Feature
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
- Watt Density Classification: MWD, Input Voltage (V): 208, Input Voltage (V): 240, Wattage at 208V (W): 4130
- Watt Density at 208V (W/sq. in.): 85, Wattage at 240V (W): 5500, Watt Density at 240V (W/sq. in. ): 113, Cold Resistance (ohms): 10.50
- Element Diameter (in.): .316, Element Length – Flange to Tip (in.): 13.47, Mounting Type: Threaded, Actual Thread Size – Outside Diameter(in.): 1-9/32
- Thread Type Series Designation: NPSM, Configuration: Fold back, Nominal Thread Size – (in.): 1, Threads per Inch: 11-1/2
Description
Product Description
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Conclusion
By our suggestions above, we hope that you can found Heating Element For Water Heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
