Top 9 Makita Cordless Blower Vacuum With Battery And Charger

The Makita 18V LXT® Lithium-Ion Cordless Blower (model DUB182Z, tool only) is a go-to clean-up tool and a favorite on job sites and in workshops. It seamlessly combines the convenience of cordless with the superior power-to-weight ratio of Makita’s 18V LXT® Lithium-Ion battery technology. The DUB182Z is the perfect addition to any kit, tool bag or work shop. It’s part of Makita’s expanding 18V Lithium-Ion series, the world’s largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. The DUB182Z features a Makita-built high torque motor with a no load speed of 0-18,000 RPM and an air velocity of 179 mph. The DUB182Z has three speeds: Low (75 minute run-time); Medium (25 min.); and High (12 min.) when using the full-size 18V LXT® 3.0Ah Lithium-Ion battery (sold separately).

With zero emissions and lower noise, the 18V LXT Brushless Cordless Blower Kit (XBU03SM1) is a welcome solution for clean-up applications. It’s powered by one 18V LXT battery, the same battery that powers the full range of solutions in the expanding LXT system. This blower features a compact and ergonomic design, weighing in at only 6. 5 lbs. and measuring 32-1/2” long. With no carbon brushes, the Makita BL Brushless motor runs cooler and more efficiently for longer life, and delivers speeds up to 116 MPH air velocity and a full 459 CFM. Makita’s efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. A cruise control lever provides management of power and run time. The XBU03SM1 features Makita Extreme Protection Technology (XPT). XPT is a protective seal inside the tool, and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components. It’s part of Makita’s expanding 18V Lithium-Ion System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita 18V Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

With zero emissions and lower noise, the 18V LXT Brushless Cordless Blower (XBU03Z) is a welcome solution for clean-up applications. It’s powered by one 18V LXT battery (sold separately), the same battery that powers the full range of solutions in the expanding LXT system. This blower features a compact and ergonomic design, weighing in at only 6. 5 lbs. and measuring 32-1/2” long. With no carbon brushes, the Makita BL Brushless motor runs cooler and more efficiently for longer life, and delivers speeds up to 116 MPH air velocity and a full 459 CFM. Makita’s efficient BL Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. A cruise control lever provides management of power and run time. The XBU03Z features Makita Extreme Protection Technology (XPT). XPT is a protective seal inside the tool, and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components. It’s part of Makita’s expanding 18V Lithium-Ion System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita 18V Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

The 18V X2 LXT Lithium-Ion (36V) Cordless Blower (model XBU01PT) is powered by two 18V LXT batteries, so users get 36V power and run time for corded and gas-powered demands, without leaving the 18V LXT platform. Model XBU01PT is a kit and includes two fast-charging 18V LXT 5.0Ah batteries and an 18V Dual Port Charger that will charge two batteries simultaneously for increased productivity and less downtime.

Landscapers & contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless ope that includes the 18V x2 LXT lithium-ion (36V) Brushless blower. With zero emissions & lower noise, the 18V x2 (36V) cordless blower is a welcome solution for clean-up applications. It’s powered by two 18V LXT batteries for maximum power & run time, but without leaving the 18V battery platform. With the efficient Makita BL Brushless motor, the blower delivers longer run time, increased power & Speed, & longer tool life. XBU02PT1 model is a kit & includes the blower, four fast-charging 18V LXT lithium-ion 5.0Ah batteries & an efficient 18V dual port rapid optimum charger. Makita efficient BL Brushless motor is electronically controlled to optimize battery energy use forup to 50% longer run timeper battery charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power & Speed when needed. With no carbon brushes, the Makita BL Brushless motor runs cooler & more efficiently for longer life. When powered by two 18V 5.0Ah batteries, the efficient Brushless motor delivers to 28 Min of run-time on dial setting #3 on a single charge. The blower features Makita extreme protection technology (xpt). xpt is a protective seal inside the tool, & is engineered for improved operation in harsh conditions by channeling water & dust from key internal components.

The 18V LXT Brushless 2 gallon HEPA filter portable wet/dry dust extractor/vacuum, tool only (XCV11Z) is a powerful, portable solution in dust management applications. The XCV11Z captures 99. 97% of particulates . 3 microns and larger with the efficient HEPA filter. It’s compact and cordless design with an shoulder strap (sold separately) allows easy transport of the vacuum throughout the space for efficient use. Get up to 60 minutes of continuous run-time and up to 57 CFM and 27” water Lift of suction with just one 5. 0Ah battery (sold separately).

With zero emissions and lower noise, the 18V LXT Brushless Cordless 2 Pc. Combo Kit (XT286SM1) is a welcome solution for clean-up applications. The kit includes an 18V LXT Brushless Cordless Blower (XBU03Z), 18V LXT Brushless String Trimmer (XRU12Z), 4. 0Ah Battery (BL1840B), and Charger (DC18SD). Both are powered by a single 18V LXT battery, the same battery that powers the full range of solutions in the expanding LXT system. This blower features a compact and ergonomic design, weighing in at only 6. 5 lbs. and measuring 32-1/2” long. With no carbon brushes, the Makita BL Brushless motor runs cooler and more efficiently for longer life, and delivers speeds up to 116 MPH air velocity and a full 459 CFM. Makita’s efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. A cruise control lever provides management of power and run time. The efficient brushless motor delivers up to 6, 000 RPM for faster cutting with the string trimmer. The XRU12Z is equipped with Automatic Torque Drive Technology, which automatically shifts from 4, 000-6, 000 RPM depending on the density of the application. There are three speed options (4, 000/5, 000/6, 000 RPM), allowing users to match the speed to the application. The easy-loading bump-and-feed trimmer head is compatible with . 080” or . 095” line and offers reverse rotation allowing users to quickly clear the head of entangled grass and weeds. Both pieces of power equipment features Extreme Protection Technology (XPT ). XPT is a protective seal inside the tool, and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components. These products are a part of Makita’s expanding 18V lithium-ion system, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita 18V Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls . Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

The 18V LXT Cordless Floor Blower (DUB183Z, tool only) is a go-to clean-up tool for job sites and workshops. It seamlessly combines the convenience of cordless with the superior power-to-weight ratio of Makita’s 18V LXT Lithium-Ion battery technology. The DUB183Z includes a long, curved flat-end nozzle for leaf blowing and floor cleaning, and is the perfect addition to any tool bag or work shop. The DUB183Z features a Makita-built variable 3-speed motor with a no load speed of 0-18,000 RPM and an air velocity of 116 mph. It is fully compatible with Makita 18V LXT Lithium-Ion batteries. When using an 18V LXT 5.0Ah Lithium-Ion battery (sold separately), users will get up to 18 minutes of continuous operation at high speed.