The Best Maytag Dishwasher Insulation

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: Frigidaire (FRIGB) 154641601 Dishwasher – Pin

Genuine Original Equipment Manufacturer (OEM) parts! This tub insulation (part number 154858701) is for dishwashers. Tub insulation 154858701 covers the outside top and sides of the dishwasher tub. Unplug the dishwasher and shut off the water supply before installing this part. For Frigidaire & Crosley.

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Dishwasher Mounting Bracket Whirlpool Kit – Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.

FIXES SYMPTOMS: 

Door latch failure. 

Door won’t close. 

INSTRUCTION: 

1.Mounting Bracket – Pretty easy. Remove port cover for both left & right mounting screws on inside of dishwasher. Remove the screws (if they haven’t already fallen out). Careful – they will drop to the floor. 

2.Pull the dishwasher partially out from under the counter. Remove the old bracket(s) and install the new one(s). You will need pliers to bend the tabs over to secure them. 

3.For the Kenmore, you need to break off the longer end. Slide the dishwasher back under the counter and align the screw holes with the cabinet. 

4.I use masking tape to hold the screw on the screwdriver so it doesn’t fall off when inserting into the screw hole in the cabinet. 

5.Use the flashlight to help see that the holes are aligned. Tighten the screw and you’re done.

PACKAGE LIST:

– 2 x Dishwasher Mounting Brackets

– 2 x Mounting Screws

MONEY-BACK GUARANTEE:

– Non original part,  if you’re not satisfied, you can ask for a replacement or full refund

Part 8269145 comes in a pack of two. Mounting brackets secure the top of the dishwasher to the underside of a cabinet or countertop. If your dishwasher moves, shakes, or tilts forward, it may be time to replace one or both of the mounting brackets. The PartsBroz 8269145 bracket set fits and performs just like the original. Use it with a variety of top name brand dishwashers.

Installation Tips

Before beginning the repair, disconnect the dishwasher from its power source. Depending on the model, you may also need to disconnect the water supply. You’ll need a pair of needle nose pliers and a screwdriver to complete the repair. Make note that brackets typically wear down at the same rate, so be sure to check both brackets and replace both if needed.

Replacing your dishwasher’s mounting brackets is a simple way to get your dishwasher running like normal.

Have any of these problems? These brackets can help:

• Door won’t latch shut
• Door won’t close
• Noisy dishwasher

Part 8269145 is a functional equivalent for part numbers: 8269145, WP8269145, AP3039168, PS393134, 830941, AH393134, and EA393134.

Compatibility

It works with top dishwasher brands and many of their models. These include:

• Whirlpool
• KitchenAid
• Kenmore
• Maytag
• Jenn-Air
• Amana
• Estate
• Magic Chef
• Inglis
• Crosley
• Roper

Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number for your dishwasher.

This is an O.E.M. Authorized part . This is an authorized aftermarket product. Fits with various WD01X10612 brand models.