517 reviews analysed
1. PanaVise 381 Vacuum Base PanaVise
Feature
- Single knob controls head movement through 3-planes: 90 Degree Tilt, 360 Turn & 360 Rotation
- Jaws are 2.5-Inch (63.5mm) wide, 0.5 (12.6mm) tall and open to 2.25 (57.1mm)
- Base accepts all 300 series Heads and any 5/8-Inch (15.9mm) diameter shaft
- Pad footprint measures 5.125 x 4.25 (130.2mm x 108mm). Height: 6.125 (155.6mm), Weight: 2.8 lbs. (1.3kg)
- Limited Lifetime Warranty!
Description
Product Description
PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise’s Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 381 VACUUM BASE PANAVISE, The world’s most PORTABLE work holding tool! Quickly attaches to any smooth, non-porous flat surface with the flip of a lever! Take it anywhere you need it for hobbies, electronics and small home repairs. Our Vacuum Base PanaVise is widely used for portable applications. Single knob controls head movement through 3-planes: 90 Degree Tilt, 360 Turn & 360 Rotation. Jaws are 2.5-Inch (63.5mm) wide, 0.5 (12.6mm) tall and open to 2.25 (57.1mm). Nylon jaws offer excellent electrical insulation and gentle holding power, continuous heat tolerance up to 200 F (93C), intermittent heat to 300 F (149 C). Interchangeable jaws available. Base accepts all 300 series Heads and any 5/8-Inch (15.9mm) diameter shaft. Pad footprint measures 5.125 x 4.25 (130.2mm x 108mm). Height: 6.125 (155.6mm), Weight: 2.8 lbs. (1.3kg). Limited Lifetime Warranty!
From the Manufacturer
The PanaVise 381 vacuum base PanaVise is a work-holding tool base and head combination designed for use on smooth, non-porous surfaces away from traditional work benches. The base includes a smooth rubber pad and lever combination which creates a vacuum that secures the unit to surfaces. The head assembly component opens to 2-1/2″ (63.5 mm), and clamps down with smooth insulated nylon jaws for gentle holding power. Other features include rugged, yet lightweight construction and a PanaVise “split-ball” adjustment element utilizing single-knob controls for head adjustment on three separate planes (tilt, turn and rotate).
View larger.
Portable Clamp-free Holding Power
The 381 vacuum base PanaVise is a portable two-piece work-holding tool suitable for hobby, electronics and small home repairs, that consists of the PanaVise 380 vacuum base and the 303 standard vise head. The base component of the unit adheres to smooth, non-porous surfaces via the vacuum action that the rubber pad and flip handle at its bottom create when engaged. The vacuum action creates a stable and reliable working platform that eliminates the need for traditional bench clamps or weighted accessories. The combined unit weighs 2.8 lbs. (1.3 kg), is portable and easy to transport. The rubber vacuum pad is replaceable if its holding power is ever compromised by wear.
The standard 303 vise head assembly utilizes smooth, removable nylon jaws along its opening that measure 2-1/2″ (63.5 mm) by 1/2″ tall (12.6 mm). These secure tough small jobs without scratching and offer excellent electrical insulation and gentle holding power. The overall vise opening width between jaws is 2-1/4″ (57.1 mm). Because exposure to heat sources is common in vise applications such as gluing, circuit board wiring, jewelry making and use around handheld power tools, the vise head assembly is continuously heat tolerance to 200 degrees F (93 degrees C), and intermittent heat tolerant up to 300 degrees F (149 degrees C).
View larger.
View larger.
Tilt, Turn and Rotate Functionality
The PanaVise 381 work-holding tool utilizes PanaVise “split-ball” adjustment functionality at the point of 380 vacuum base and the included 303 standard head. Once an item is secured in the vise head, the split-ball system built into the top portion of the base allows a user to maneuver the item along three separate planes using a single knob to make the adjustments. The mobility range of the model 381’s split-ball system is a 90-degree tilt to the side, along with either an angled rotation, or level turn range of 360 degrees. This range of mobility allows a user to rearrange work items into any position, which limits the need to adjust the overall position of the vise or the item within the vise.
Additional Vise Head Options
In addition to the uses possible with the included, the 381 vacuum base PanaVise is intended for use across a wide range of applications and is designed to be compatible with a variety of vise heads. The base works with all PanaVise 300 series vise heads, the PV Jr. model 203 head or any 5/8″ diameter shaft tool accessory.
Key Features
- Vacuum base and vise head combination for portable use on any smooth, non-porous surface
- Rubber pad of base creates vacuum action that hold tool on vertical or horizontal planes
- Flip lever allows for fast engagement and disengagement of vacuum
- The easy-to-use “split-ball” adjustment element utilizes single-knob controls for head movement through three separate planes
- Rubber vacuum pad is replaceable
- Base is compatible with additional 300 series vise heads, or any 5/8″ diameter shaft tool accessory (all sold separately)
- Heat-tolerant nylon jaws
Specifications
| Overall | 380 Vacuum Base | 303 Standard Vise Head |
|---|---|---|
|
|
|
What’s in the Box?
- PanaVise 381 Vacuum Base PanaVise (380 vacuum base, 303 standard vise head)
- User’s manual and warranty information
Limited Lifetime Warranty
All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance.
About PanaVise
Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, Electronics, CCTV Camera Mounts, and Audio/Video Mounts, earning PanaVise the nickname the “the hold it anywhere you want it company.”
2. PanaVise 209 Vacuum Base Pv Jr.
Feature
- Attaches securely to any smooth, flat, non-porous surface
- Features an easy-to-use single knob which, controls head movement through 3-planes: 210 Degree Tilt, 360 Turn and 360 Rotation
- Fine/coarse adjusting knob controls jaw pressure for delicate work
- Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic continuous heat tolerance to 350 F (177 C), intermittent heat up to 450 F (204 C)
- Limited Lifetime Warranty!
3. MaxWorks 80743 Universal 3" Table Bench Clamp Vise with Swivel Head for Hobby, Electronics, Metal Working, Craft, Jewelry Inspection & More
Feature
- Quick and easy to install or remove. 3″ Jaw with and maximum jaw opening of 2″
- Includes rubber jaw protectors for clamping delicate and small work pieces. Grooves on metal jaw surface hold round work piece tightly
- Head rotates 360 degrees and tilts 45 degrees to allow user to maneuver work piece without removing it from vise for added versatility
- Clamps on any 2″ Surface by turning lead screw with hand tight knob
- Constructed from durable die cast aluminum body
Description
Our MaxWorks Table Bench Clamp Vise is constructed from die cast aluminum body that is light in weight for easy handling & yet durable to provide years service. Head rotates 360 degrees and tilts 45 DEG and allows user to maneuver work-piece without removing vise for added versatility. 3″ jaw width with a maximum opening of 2″. will easily clamp on 2″ surface by turning lead screw with hand-tight knob. Includes removable rubberized jaw pads to protect delicate work-piece. Grooves on metal jaws hold round work-pieces tightly and securely. A must for any workshop, garage, home, office, school lab, etc.
4. PanaVise 380-RK 380 Repair Kit
Feature
- For use with PanaVise 380 and 381 vacuum bases
- To determine if your Vacuum Base needs replacing, clean the pad with a clean towel and make sure that is free of debris. If it still loses suction, the pad needs to be replaced.
- Includes rubber pad, handle and lock washer
- For 380 Vacuum Base or 381 Vacuum Base PanaVise
- Limited Lifetime Warranty!
Description
Product Description
Panavision is a major manufacture of Vises and Work Holding Tools. PanaVise’s Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All Panavision Products are covered by a Limited Lifetime ! Introducing the Pan vise 380-RK 380 REPAIR KIT, Repair your torn or damaged vacuum base pad! For use with Panavision 380 and 381 vacuum bases. To determine if your Vacuum Base needs replacing, clean the pad with a clean towel and make sure that is free of debris. Then attach it to a clean, non-porous surface (such as a window). If it still loses suction, the pad needs to be replaced. Includes rubber pad, handle and lock washer. For 380 Vacuum Base or 381 Vacuum Base Panavision. Limited Lifetime !
From the Manufacturer
The PanaVise 380-RK is a repair kit specifically designed to replace torn or otherwise damaged vacuum pads that provide the stationary holding power for the PanaVise 380 vacuum base and the PanaVise 381 vacuum base vise combination. The kit includes a rubber pad, a handle for engaging vacuum action and a lock washer. To determine if the rubberized vacuum pad at the bottom edge of these products needs replacing, clean the pad with a clean towel and make sure that is free of debris. Then attach it to a clean, non-porous surface (such as a window). If it still loses suction, the pad needs to be replaced.
Limited Lifetime Warranty
All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance.
About PanaVise
Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, electronics, CCTV camera mounts, and audio/video mounts, earning PanaVise the nickname the “the hold it anywhere you want it company.”
5. PanaVise Model 201 "Junior" Miniature Vise
Feature
- n/a
- Easy-to-use single knob controls head movement through 3-planes: 210 degree Tilt, 360 Turn & 360 Rotation
- Fine/coarse adjusting knob controls jaw pressure for delicate work
- Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic
- Continuous heat tolerance to 350 F (177 C), intermittent heat up to 450 F (204 C)
- Limited Lifetime Warranty!
6. Bessey BVVB Vacuum Base Vise
Feature
- Vacuum base mounts on any smooth work surface for work holding where you need it
- Vise can be rotated 360-Degree and pivoted 90-Degree to positon wrk optimally with out removing clamped part from the vise jaws
- Protective jaw caps incldued for hold parts without marring
- Steel and die cast parts for durability
7. PanaVise 396 Wide Opening Head PanaVise
Feature
- The jaws on this vise open a generous 6-Inch. Wide opening jaws open to 6-Inch (152.4mm) and close to zero
- Ribbed, neoprene jaw pads are 1.875 (47.6mm) high x 1.5 (38.1mm) wide and provide a sure grip to hold and insulate PC boards and other larger objects
- reverse the pads and the wide V holds delicate cylindrical objects
- Base accepts all 300 series Heads and any 5/8 (15.9mm) diameter shaft
- Base features 4.3125 (109.5mm) bolt circle countersunk for three 1/4 (6.3mm) flathead screws (not included). Height: 7.3125 (185.7mm), Weight: 3.0 lbs. (1.4kg)
- Limited Lifetime Warranty!
- Wide gripping head with the full tilt, turn and rotatation capabilities of the PanaVise split ball
- Jaws open to 6″ (152.4mm) to accommodate most PC boards in its molded, deep-ribbed neoprene jaw pads
- When pads are reversed, the wide “V” can be used for securing delicate items, such as tuners, coils, motor armatures, etc
8. Pony 13025 3-Inch Light Duty Clamp On Vise
Feature
- This item is Pony 13025 3-Inch Light Duty Clamp On Vise
- Used for Handtools & Tool Organizers, Clamps
- The product is manufactured in China
- 3-inch jaw width
- 2-1/2 inch opening capacity
- Mounts easily and securely on edges up to 2-inches thick
- Plated steel screw and handle
- Steel double guide bars allow smooth operation
Description
Product Description
Pony 13025 3-Inch Light Duty Clamp On Vise is designed for light duty home, shop and professional use. It is fully portable, yet mounts easily and securely on edges up to 2-inches thick. Features: 3-inch jaw width, 2-1/2 inch opening capacity, plated steel screw and handle, steel double guide bars allow smooth operation, orange baked enamel finish prevents rusting, cast pipe jaws holds round pipe. The Chicago based Pony Tools Inc. (formerly doing business as Adjustable Clamp Company) which was established in 1903 is the manufacturer of all Pony Vises. Our Pony Vises are made in China.
Amazon.com
Every workshop needs at least one vise, and Pony’s incredible clamp-on vise is perfect. It’s completely portable and clamps onto any table up to 2 inches thick. The sliding handle turns like a charm, and you’re set. For such an incredibly inexpensive vise, the jaws are really wide, and they even have a serrated surface, with an open capacity of a full 2-1/2 inches. We can think of a thousand uses for such a handy device. It’s like an extra hand whenever and wherever you need it. Pony’s earned its reputation as a maker of fine clamps, so you know anything in the distinctive bright orange color will do right by you. This is no exception.–Kris Jensen-Van Heste
9. NUZAMAS 2in1 Table Vise Bench Vice Aluminum Alloy Swivel 360 Degree Rotating Clamp for Electric Drill Stent Grinder Tools Holder
Feature
- 2 in 1 Aluminum Vise Clamp: Bench Vise and Drill/ Grinder Holder
- Adjustable and Rotates to any possible angle, Rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position.
- Ball joint for flexible working, 360 degree rotation.
- Light weight, small vise, easy operation, ideal for any DIY/ hobby work, a workshop, small repairs, model makers, woodwork, jewelry, general use overall.
- Max Opening: 2″ (50mm), Vise clamp fits any bench/desk up to 2″(50mm) thick, Approximately Width of Jaw: 3″ (75mm), Driller holder size 1.5”-1.6” (38mm-41mm)
Description
This 2 in 1 Aluminum tabletop vise and rill/ Grinder Holder is economical, and functional.
Its jaws are lined with tough rubber, and will not scratch precious objects. With up to 3″ (75mm) wide, it can work with most workpieces. The clamp has a 2″ (50mm) opening to fit any bench or table less than 2″ (50mm) thick. The drill holder can hold 1.5”-1.6” (38mm-41mm) tools. The ball and socket configuration allows the jaws to be tilted and rotate 360 degrees, but holds jaws firmly in place at any angle.
Specifications:
Color: Silver
Material: Alloy aluminum
Vice Jaw Width: 75mm/3″ (Approx.)
Vise Jaws Max Opening: 50mm/2″ (Approx.)(with Rubber Jaw Insert)
Vise Clamp Max Opening: 50mm/2″ (Approx.)
Driller holder size 1.5”-1.6” (38mm-41mm)
Package included:
1 x NUZAMAS Aluminum Vise Clamp
1x Driller holder attachment
10. 2 Inch Jaw Aluminum Table Vise For Jewelery, Hobby, Electronics By Stalwart
Description
The Stalwart aluminum Table vise is just what you need for holding small parts for jewelry, hobby, model making, electronics and home and work projects. The lightweight aluminum vise is portable for those jobs on the go. It is ideal for all your sanding, grinding, detailing, drilling, carving and chiseling projects. Important: avoid buying counterfeit products and Transactions with unauthorized sellers. Look for our logo on the packaging for every one of our products. Stalwart is committed to providing the consumer with the absolute best price and value on all of our products, which we ensure by applying a rigorous quality control process. Stalwart is a registered trademark protected by U.S. Trademark law and will be vigorously defended.
Conclusion
By our suggestions above, we hope that you can found Panavise Swivel Vacuum for you.Please don’t forget to share your experience by comment in this post. Thank you!
