The Best Phantom Range Extender

Description:
Compatible for DJI Phantom 4, Phantom 3 Proffesional/Advanced, Inspire 1/2
controller transmitter. (No compatiable for Phantom 3 Standar, Phantom 2).

Copper Parabolic Technology:
Foil Aluminium using. prevent oxidation. Accurate
parabolic curved booster completely reflects the remote signal to the antenna (focal
point of reflector)

Parabolic reflector;
Foldable; Slide on and off. No tools or modifications
required. No bump or deformation on the reflecting panel!

It Significantly Increase Your both remote control and Wi-Fi video connection
performance for DJI Phantom 4 Phantom 3 Pro / Advanced / Inspire 1, In an open
area, The actual measurement distance greater than 2.8KM.

Package included:
Signal Booster x 1(DJI controller, mobile device holder and
tablet are NOT included)

DJI Phantom 3 Standard WiFi Signal Range Extender Antenna Kit.

Lightweight, durable, pratical and convenient to use in compact design. Full range coverage, strong and stable signal improves both remote control and Wifi video connection performance.

Our antenna kits will extend the range up to 4 times the DJI rating and help with the signal penetration around objects. Increases range from approx. 300m to up to 1200m. Actual range extension will depend on your exact deployment environment.

Four Antenna Kit: Two customized high-gain 2.4GHz~2.591GHz 7dBi panels & 1 10dBi 5.8GHz omni antenna & 1 6 dBi 5.8GHz panel antenna with stand.

This item is for the DJI Phantom 3 Standard only.

Installation of this model: https://www.youtube.com/watch?v=UQSqknMV8BA

BlueProton DJI Phantom 3 Standard WiFi Signal Range Extender Antenna Kit.
(6)-Antenna Kit: (2)+(2) customized high-gain 2.4GHz-2.591GHz 7dBi Panels & Omnis, (1) 10dBi 5.8GHz omni antenna, (1) 6dBi 5.8GHZ panel antenna with stand and installation hardware. Full
Lightweight, durable, pratical and convenient to use in compact design. Full range coverage, strong and stable signal improves both remote control and Wifi video connection performance.

Our antenna kits will extend the range up to 4 times the DJI rating and help with the signal penetration around objects. Increases range from approx. 300m to up to 1200m. Actual range extension will depend on your exact deployment environment, and is not guaranteed.

Installation is relatively simple with guided YouTube video.

This item is for the DJI Phantom 3 Standard only.

 BlueProton ARGtek DJI Phantom 4 PRO+, 4 PRO/ADV, 3 PRO/ADV Range Extender Kit (8 Antennas) 

DJI Mavic Mini Combo

TECHTOO 7dBi 2.4GHz/5.8GHz Omni Antenna with RP-SMA Connector Can Increase The Range of Your Wireless Router/Access Point or Client.
Off the shelf equipment typically has a 2.0 dBi antenna. This antenna will increase your signal strength and therefore range.

The Rugged Polycarbonate Body Makes Them Suitable For Use In a Wide Variety Of Applications, Including Office LAN Environments Factory Floors, Remote Telemetry And Other Environments.

The RP-SMA Connector Has Threads on The Inside And a Center Socket. The Tilt And Swivel Feature Allows The Antenna To Be Positioned At Practically Any Angle.
This Screw-on, Swivel Mount RP-SMA FEMALE Connector Is Compatible With Many Wireless Communications Systems Including: Dlink, GRE America, Linksys WET11, Maxtech, Netgear, Proxim, Siemens, SmartBridges, Waveaccess, Zcom, Netgate Wireless-Redy M1n1wall, RouterStation PRO Products And All USB Adapters With Screw on/off Antennas Such As The ALFA And EnGenius USB products.
*Note: Change ALL the Antennas into NEW TECHTOO 7dBi Duan Band Antennas, If your old Device Have More Than One Antennas.

Increases the Range of Your Wireless Device Such as Router, Access Point, Mini PCIe Network Card, Wireless Wan Range Extender
Simply Replace Current Antenna to Increase Signal Strength, Extend Wireless Range to Dead Spot

2x 7dBi RP-SMA Antenna for Both 2.4GHz and 5.8GHz 802.11 B/G/N/AC Frequency
Nickel Plated RP-SMA Connector(Screw-On Swivel)
Legal Statement: Copyright2016 by TECHTOO Inc. All rights reserved.
No part of the description above may be reproduced, distributed, or transmitted in any form or by any means, including relisting to Amazon or any online marketplace, photocopying, recording, or other electronic or mechanical methods, without the prior written permission of TECHTOO Inc. For permission requests, write to the seller ID below:
Amazon Seller ID: A3FOIJMNOEIRMM

Features:

Four Antenna Kit: Two customized high-gain 2.4GHz~2.591GHz 7dBi panels & 1 10dBi 5.8GHz omni antenna.

Full range coverage, strong and stable signal improves both remote control and Wifi video connection performance.

Our antenna kits will extend the range up to 4 times the DJI rating and help with the signal penetration around objects. Increases range from approx. 300m to up to 1200m. Actual range extension will depend on your exact deployment environment, and is not guaranteed.

Installation is relatively simple with guided YouTube video.

This item is for the DJI Phantom 3 Standard only.

BlueProton DJI Phantom 4 & Phantom 3 Advanced & Professional WiFi Signal Range Extender Antenna Kit. Two high gain 7dBi 2.4GHz Panel antennas & two 7dBi 2.4GHz Omni antennas in this kit have been customized for the Lightbridge system. (If you need 2.4GHz antenna for the P3 Standard, please contact us! P4/P3 Pro & Advanced use the Lightbridge System for LIVE VIEW/APP. The P3 Standard uses WiFi )Lightweight, durable, pratical and convenient to use in compact design. Full range coverage, strong and stable signal improves both remote control and Wifi video connection performance. Our antenna kits will extend the range up to 4 times the DJI rating and help with the signal penetration around objects. Increases range from approx. 2.5 Km to up to 7.5 Km. Actual range extension will depend on your exact deployment environment, and is not guaranteed. Installation is relatively simple with guided YouTube video. You should install a firmware update to increase your channels to 32 channels prior to installation. (Higher channels have less WiFi interference) The high gain 7dBi panel antennas in this kit have been customized for extended WiFi spectrum. Normally, WiFi only operates on 2.4GHz. The ARGtek panels have extended frequencies up to 2.591GHz. The kit will work if you do not update the firmware, however if you update the firmware to unlock the rest of the channels on your DJI drone, you will be able to use all 32 channels. (DJI only opens 8 channels). The custom ARGtek panel antennas work best on CH 22 however they will work on the other channels also. This item is for the DJI Phantom 4 & Phantom 3 Advanced and Professional only.