Finding your suitable readers for reptile cooling system is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for reptile cooling system including detail information and customer reviews. Let’s find out which is your favorite one.
522 reviews analysed
1. Misting Cooling System Outdoor Misters Automatic Plant Watering System 8x5MM 32.8FT (10M) Misting Line 10 Mist Nozzles 3/4 Inch Brass Threaded Adapter for Patio Garden Greenhouse Umbrellas Trampoline
Feature
- HIIRALIY Misting cooling system directly use tap water to spray, cools the surrounding air temperatures up to 20 degrees,before cutting tube, we recommend you run water thru the tubing.
- 32.8ft mister hose made of 8mm (OD) X 5mm (ID) PU recyclable materials which ensures durable, UV resistant and long life use time. Note: Please put the connected part of the hose into the hot water for 10 seconds before assembling
- DIY misting system provided 3/4 inch metal threaded connector ensures to prevent leaking from the begin for good sealing and no-leaking
- Mist cooling kit provide all the accessories you need for you to easily assemble air cooling and plant misting system in ten minutes
- Mist watering kit widely used for patio garden, lawn, trampoline water park, landscaping, greenhouse, humidification, outdoor cooling system, swimming pool misting fog cooling
2. Inkbird ITC308S Temperature Controller for Aquarium with Submersible Probe, Heating Cooling Outlets Thermostat for Heater and Cooling Fans
Feature
- Temperature Control Mode: On/Off Control. Cooling and Heating control.
- Fully submersible probe. Aquarium probe works better in water than standard probe.
- Temperature calibration
- Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
- Maximum output load: 1200W (110V).
- It’s an all in one, simple solution providing control of cooling and heating.
Description
Specification:
Temperature Control Range: -50~120 °C / -58~248 ° F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±2°F (-58~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x Temperature controller ITC-308S with Aquarium Probe
1x Manual
3. OiiBO High Pressure 10 Liter Reptile Misting System Adjustable Rainforest Timing Sprayer with Remote Controller and 8pcs Nozzles, Multi Ultimate Terrarium Humidifier Fogger Auto Misting Machine
Feature
- 【INTELLIGENT PROGRAMMABLE RAINFALL SYSTEM】The sprayer can adjust the spray flow to meet the needs of pets or rainforest landscapes
- With built-in programmable timer, the misting system can be programmed to mist multiple times per 24-hour cycle, with spray durations ranging from 2 seconds up to 2 minutes. Thanks to the remote controller, you can remotely start and stop the terrarium rainfall system by only moving your fingers around 10 meters away.
- 【INTEGRATED DESIGN MISTER AND 2.6 GALLON WATER TANK】It is easy to add water directly to the water inlet without removing the water bucket
- The large water tank 2.6 Gallon(10L) can hold more water and support long term use, no need to add water frequently and it will shut down when water is run out.
- 【SMART BACKWATERING TECHNOLOGY】Internal backwatering technology ensures water cut off at the moment of stoppage, and the dripping can be less than 1 drop, thus preventing the water from accumulating in the bottom.
- 【SUPER SILENT PUMP WITH 360°ROTATION SPRAY NOZZLES】The diaphragm silent pump works very stable and soundless, provide your pet a comfortable and quiet environment. It can connect 20pcs spray nozzles and work at the same time through a long 29.5ft(9m) black pipe. (8pcs spray nozzles included)
- 【COMPATIBLE WITH ALL ENCLOSURES】This misting system can add or keep humidity for your reptile/amphibian/herbs
- It is compatible with a variety of enclosures as terrarium, tank, vivarium, cage, aquarium, reptarium, or plastic/PVC/glass cage.
Description
These misting systems provide precipitation and humidity control for various species of plants, amphibians, and reptiles. The systems are the perfect addition to your terrarium, offering everything you need for your misting needs. If you have many terrariums or something else needs water, this is the best choice for you. To get one can meet all needs.
We put together this system by listening to our customers. The components featured are the most commonly ordered and asked for by our customers. It includes “T”,“L”,“Y” connector etc. for user-friendly.
TECHNICAL PARAMETERS :
1. Power adapter: Input:100-240v-50/60hz Output: 24V DC
2.Run Dry Alarm and Protection: Yes
3.SELF SUCTION HEIGHT: ≦2.0m
4.OPEN FLOW: ≦1.1L/min
5.WORK UP TO 20 NOZZLES
6.Product size: 9.2*9.2*15.6in
7.Product weight: 13.2lbs
Package include:
1.Main engine, including a water tank: 1pc
2.Power adapter: 1pc
3.Black water pipe: 1pc*30ft(9m)
4.Pipe cutter: 1pc
5.Copper filter head: 1pc
7.Spray nozzle component: 8pcs
8.Remote Controller: 1pc
9.”T” connector: 1pc
10.”L” connector: 1pc
11.Y-connector : 1pc
12.ZipDrip valve with 1/4″ fittings: 1pc
13.Fixed Fixture: 5pcs
14.Screws: 10sets
15.Suction Disc:10pcs
16.Tubing Clip: 10pcs
Control function and setting method of sprayer panel:
1.Use three knobs to control the humidity and water volume according to the requirements of the breeding box or ecological tank.The “A” knob is used to control the spray interval in hours; the “B” knob is used to control the spray duration in seconds; the “C” knob is used to adjust the spray flow. 2.Operation method: *When the “A” knob is rotated to “8” and the “B” knob is rotated to” 20″. it indicates that, from now on, the sprayer sprays water every 8 hours and the duration of each spray is 20 seconds.
4. Petzilla Aquarium Chiller, Fish Tank Cooling Fan System for Salt Fresh Water
Feature
- For aquarium wall (or width of the lip around the top edge) LESS THAN 1/2″
- Reduce water temperature and drop up to 2 ~ 4℃
- Offer a couple degrees cooling to offset lights and UV filter
- 2 variable speed, wide angle adjustment, stable and strong clamp
- Easy installation & No assembly required (AC adapter included)
Description
What Can Petzilla Cooling Fan Do for Me?
During summer, the aquarium tank easily gets hot enough to cook fishes. Petzilla smart cooler kit can reduce aquarium water temperature up to 2 to 4℃, and can also offer a couple degrees cooling to offset lights and UV filter. 2 variable speed and 0~90°adjustment. If you are not going to spend over $200 to purchase a chiller system for dramatic decrease in temperature, this Petzilla cooling fan is a great little investment for warm aquariums.
How Many Fans Do I Need?
A detailed size chart in image for your reference. It takes time for it to get the tank down there. You might choose 1 SIZE UP or add a bottle of frozen water, if you want better cooling effect and need to drop the aquarium temp faster. If the indoor temperature is pretty high, or you have aquarium of bigger size and want better ventilation, maximize air movement in an enclosed area with two cooling sets instead of one unit, you can DIY a effective temp controller.
What Should I Do If It Doesn’t Work As Expected?
We offer 30-day Money-back Guarantee & 1-year Warranty & Free User Support. If it doesn’t working as expected, let us know indoor both temperature and size of your tank (dimensions and capacity), we will definitely help get our products to work properly. We take care of all quality-related issues with a replacement or full refund. Please CONTACT US for any problem.
Note:
1. Make sure the thickness of your aquarium wall (or the width of the lip around the aquarium top edge) is LESS THAN 0.5".
2. No worry about the adapter outlet. We notice your concerns and the adapter is as shown in the image.
3. Be careful and don’t push too hard when installing in case of damage to the aquarium and cooling fan.
5. DIY Leak Proof Copper Misting System- Misters for Patio, Gazebos, Backyard Cooling, Pool and Play Areas(66ft-3/8 tubing)
Feature
- MONEY BACK GUARANTEE: If you are not completely satisfied with your purchase for ANY reason, simple return the Mist Cooling Kit to us and you will receive 100% refund, no questions asked.
- Easy to Assembly: This patio misting system can be assembled and having you enjoying your backyard in just minutes. It will attach to any standard outdoor faucet(3/4 inch). No special tools are required.
- High Quality: Use of precision brass misting nozzle keypunch, sophisticated production,made with high quality UV treated flexible tubing, resistant to UV up to 3.5 or more, resistant to yellowing,resistant to hydrolysis, resistant to microbial degradation.
Description
Cool Different locations in a Snap!
If you’re looking for an easy way to cool your outdoor living space, Bangder’s Mist Cooling Kit is a great solution.
The fantastic outdoor cooling system provides a cool environment from the heat for your favorite outdoor areas.
This patio misting system can be assembled and having you enjoying your backyard in just minutes.
Installation is a breeze. No special tools are required. Attaches to the outdoor faucet/spigot or garden hose.
Storage and Maintenance:
⚘ If you live in an area that will see freezing temperatures be sure to drain your performance misting system for outdoor cooling before winter sets in!
⚘This misting nozzle does not have a filtering device. it is recommended that you clean your nozzles once a year.
⚘The nozzles need to be kept simple; soak regularly in the spray cleaner to remove the possible accumulation of mineral deposits.
Kit Contents:
1 x Faucet Quick Connector set(1 Male faucet adaptor and 1 Female faucet connector)
10 x Brass Mister Nozzles
10 x Compression Tees
1 x End Connector
10 x cable ties
Tips:
①Please check whether each nozzle is tightened before installing cooling system,
it is best to add some teflon tape to make it more tight.
②When you want to connect the tubing quick to the male faucet adapter,
first please you can push down the tubing quick connector,
secondly you can connect the quick connector to the male faucet adapter,
last you can release the tubing quick connector,
then you hear a crisp sound, indicating that they are perfectly connected.
6. Exo Terra PT2493 Monsoon Multi System
Description
The Exo Terra monsoon multi is a programmable misting system suitable for all types of terrariums and greenhouses. It helps maintain optimal humidity by generating a fine mist at programmed intervals, the duration and frequency of which can be easily adjusted depending on the type of Animal or plant housed. Frequent misting helps stimulate breeding behavior, and is a necessity when housing live tropical plants such as bromeliads, orchids, Mosses, etc. The system can be programmed to mist multiple times per 24-hour cycle, with spray durations ranging from 2 seconds up to 2 minutes. The large 8 liter (2 gallon) reservoir ensures continuous operation for several days without the need for refilling.
7. Misting Cooling System,50ft(15M) Misting Line 10 Stainless Steel Mist Nozzles 10 Connector Outdoor Cool Mister for Patio Garden Umbrellas Greenhouse Fan Trampoline Waterpark
Feature
- 【Lengthen Plug-in & Cleanable Mist Nozzles】Stainless steel plug-in mist nozzle easy to install and pull out and makes mist nozzle more firmly when spraying. The mist nozzle can be completely disassembled easy to clean the dirty when it is blocked by impurities.
- 【Anti-locking buckle Connector Design】The connector has a snap-on design, Pressing the blue o-ring to put in the hose and Pull outward the hose to make the connection firm and it won’t leak due to excessive water pressure.
- 【Cool Down the Heat for you】 The SdeNow outdoor cooling system provides a cool environment from the heat for your outdoor activities, cooling and humidifier function bring you a cool summer and a more healthy life.
- 【Easy to install & Energy conservation】 Completely assembled system Installs not more than 10 minutes. Misting cooling system delivers mist to cool the air in the hottest summer weather directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you.
- 【Widely used scenarios】Misting Cooling System widely apply for garden, greenhouse, Fan cooling, landscaping, humidification, outdoor cooling system, Trampoline water park, Swimming pool misting fog cooling, air purification and so on
8. EXO-TERRA Monsoon Solo High Pressure Misting System
Description
The Exo Terra monsoon solo is a programmable misting system suitable for all types of terrariums. It helps maintain optimal humidity by generating a fine mist at programmed intervals, the duration and frequency of which can be easily adjusted depending on the type of Animal or plant housed. Frequent misting helps stimulate breeding behavior, and is a necessity when housing live tropical plants such as bromeliads, orchids, Mosses, etc.
9. MistKing 22251 Starter Misting System V4 – Perfect Reptile Misting System with Timer – This Terrarium Misting System is a Great Mister for Reptiles-Combo-Jungle Vine by Zonex
Feature
- 1.This is the latest 4th generation Starter Misting System.
- 2.This system is based on a robust pump with our latest timer providing exceptional and reliable performance.
- 3.It can easily run 1 nozzle or can be upgraded to as many as 10.
- 4.Our misting systems have been applied in a multitude of applications, from patio cooling, reptile, amphibian terrarium/vivarium enclosures, growing shelves with orchids or exotic plants, hobby greenhouses, and even grocery and industrial applications.
- 5.Our misting systems come with instructions and push in bulkhead fitting to convert any bucket or container into a reservoir.
Description
This Starter Misting System v4.0 includes 24V DC misting pump, capable of running up to 10 nozzles. Pump is very robust and can run dry!!! This pump has been extensively tested for a long time in the field and in the factory and by us personally. It has extremely low failure rates and it simply WORKS! Custom manufactured for MistKing.com and is unique to us. Pump is adapted for 1/4″ tubing and includes vibration dampening rubber feet. Pump power adapter. (cUL listed) 1 Value L misting assembly. Assembly is tested and it includes our super low flow check-valved spray tip, custom crafted in black with an average droplets size of ~50 microns. Check-valved tips greatly reduces the post mist drip. These nozzles can be adjusted and positioned in any direction. Can be securely fastened to any surface up to 0.625″ (5/8″) or 1.5 cm thick. This misting assembly is patented at USPTO. Reservoir bulkhead with O-ringand plug. 15 feet of 1/4″ black opaque tubing Digital Seconds Timer ST-24 – with instructions. 5 tubing clips with screws Reference manual Starter System can silently run 1 nozzle or as many as 10 nozzles. Our misting systems have been applied in a multitude of applications, from patio cooling, reptile, amphibian terrarium/vivarium enclosures, growing shelves with orchids or exotic plants, hobby greenhouses, and even grocery and industrial applications. Major ZOOs, botanical gardens, educational institutions, corporations and individual hobbyists all recognized our dedication to quality and customer service and are using our systems throughout the world.
10. Daduleeh Outdoor Misting Cooling System,Misting Line,Brass Mist Nozzles for Patio Garden Greenhouse Outdoor Mister Trampoline for waterpark 20m
Feature
- 【Upgrade Quality】: Updated mist system nozzle are made of precision brass, Easy connect,leak-proof and self-sealing Tee Joint ,high quality UV treated flexible tubing, resistant to yellowing hydrolysis and microbial degradation,and meanwhile UV up to 3.5 or more.
- 【Wide Application】: Misting Cooling System widely apply for garden, landscaping, greenhouse, humidification, outdoor cooling system, deodorant air purification, swimming pool misting fog cooling, mist mosquito system and so on
- 【Turn Down the Heat】: The fantastic outdoor cooling system provides a cool environment from the heat for your favorite outdoor areas, cools the surrounding air temperatures up to 20 degrees.
- 【 High Quality】: Use of precision brass misting nozzle keypunch, sophisticated production,made with high quality UV treated flexible tubing, resistant to UV up to 3.5 or more, resistant to
- Easy to Assembly】: This patio misting system can be assembled and having you enjoying your backyard in just minutes. It will attach to any standard outdoor faucet(3/4 inch). No special tools are required.
Description
Material Type:BRASS
Daduleeh focus on the garden products developing and selling,
providing the new and qualified products.
We are devoted to build a one-stop garden accessories shop,thanks for reviewing our products.
Pls e-mail us, if you have any question.
Advantage：
①Fine misting nozzle
②Easy connect and Leak-proof T Joint
③Proper hardness misting line(ensure tight bond with T Joint)
④Special T Joint could be used to transform ordinary fan to misting fan
⑤All accessories include
Package included:
1x20M Misting line
1×3/4″ PVC faucet connector
19xBrass mist nozzles
19XEasy Connect Tee Joint
1XTee Joint for misting fan transform
20XCable tie
Conclusion
By our suggestions above, we hope that you can found Reptile Cooling System for you.Please don’t forget to share your experience by comment in this post. Thank you!
