Top 10 Standard Inlet Low Voltage Central Vacuum

Feature

• 1. 375” x 35 foot central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
• Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
• The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue
• Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacumaid, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m + s, md, imperium, and most regional brands
• Hose is made in the USA
• The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide a simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
• Low voltage hose, so it is not compatible with electric power nozzles
• The locking stub tube is ideal for insuring the wand stays in place, avoiding unintended separation

Feature

• This inlet is for the hoses that plug into the wall inlet that uses 2 male prongs
• This will not work with the standard hoses
• The hose must have the to male prongs on the end of the hose to work with this inlet
• This cover is called a square door style
• Comes with what is pictured, except the hose that is used to show direct connect style

Feature

• The 93620 is a 1.375” x 35 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
• Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
• The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue. The hose is highly flexible and has a soft surface with rounded corrugations to avoid damage to household furnishings without the need for a hose sock
• Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacumaid, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m + s, md, imperium, and most regional brands
• The eva body and pearl gray color will not mark walls, floors, or furnishings and the 35 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present
• The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide a simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
• The locking stub tube is ideal for insuring the wand stays in place, avoiding unintended separation
• The 93620 is a low voltage hose, so it is not compatible with electric power nozzles

Feature

• All ZVac Central Vacuum Fittings Meet ASTM 2158 Standards
• 5 Central Vacuum Wall Plates Fits Most System Inlet White Low Voltage ZVac Vent Port Door Panel Vent
• Made by Zvac As a High Quality Generic Replacement For Most All Central Vacuums. Fits: Electrolux Eureka Filtex Frigidaire Hayden Honeywell Imperium MD Nadair Nutone & More! Does Not Fit Vacumaid

Feature

• 35′ Low Voltage Hose for Central Vacs
• Standard 1.5″ inlet valve diameter and Friction Fit 1 1/4″ attachment wand
• Crush proof design – SuperFlex Material
• One stage On/Off suction

Feature

• Includes 2 Central Vac White Inlet Valve Round Door Covers. (Non-OEM)
• White Standard Inlet Valve features a Round Door. Fits Beam central vac units.
• For new and existing low voltage construction applications. Easy installation.
• Most Common inlet valves used.
• Inlet opening measures 1.5″ and has 2 electrical contacts inside the port.

Feature

• Included – 1) Plastiflex 30 ft Low Voltage On/Off Central Vacuum Hose with Button Lock, 1) Central Vacuum Universal Telescopic Wand with Thumb Protection, 1) Crevice Tool, 1) Dusting Brush, 1) 12 in Floor Brush, 1) Upholstery Tool, 1) Metal Hose & Tools Caddy.
• Compatible with – Universal Nutone, Electrolux, Hayden, Centec, Kenmore, Airvac, Vacumaid, Broan, Eureka, Canavac, Honeywell, Riccar, Cyclovac Central Vacuum Systems & Any Central Vacuum using Standard Low-Voltage Inlets.
• Features- Crushproof, Lightweight, 360-degree Swivel, 30-foot Central Vacuum Hose With On/off Switch For The Suction. A Great Central Vacuum Cleaner Replacement Hose For Everyone Who Uses An Air Driven Non-electric Power Brush Such As All Models Of Turbocat And Other Small Air-driven Brushes. Compatible With Vacuum Wall Valves With Two Small Low Voltage Metal Contacts Inside The 1.5 Inch (or So) Diameter Hole. Use With Chrome Extension Tube Wands.
• The Chrome wand extends from its fully collapsed length of 24” to a fully extended length of 36” at one-inch intervals. The wand is easy to install into the turbine and accommodates all of the included accessories.
• Brand – Zvac Is Designed & Developed By Govacuum Of Chantilly, Virginia. Govacuum Is Not Affiliated With The Brand Owners, Miele, Nutone, Electrolux, Hayden, Centec, Kenmore, Airvac, Vacumaid, Broan, Eureka, Canavac, Honeywell, Riccar, & Cyclovac. Marks Are Mentioned For Compatibility Purposes Only.

Feature

• Includes – (1) – Standard Inlet Faceplate, (1) – Inlet Mounting Bracket, (1) – Short 90 Elbow, (3) – Sweep 90 Elbow, (2) – 45 Degree Elbow, (1) – Sweep T, (3) – Stop Coupler, (25) – Feet of Vacuum Pipe and Wire, (25) – Feet of Vacuum Wire
• Fits All Brands And Makes And Models Using 2″ OD Pipe (the Standard Since 1974 In The Usa). Works In New And Existing Home Construction And Fits As Compatible Replacement For Nutone, Beam, Eureka, Vacuflo, Vacumaid, Hp Vacuflo, Hayden, Broan, Electrolux, Honeywell, Canavac, Riccar, Simplicity, Imperium, Md, Zvac, Cyclovac & All Other Brands!
• Installing A Central Vacuum System Is A Project Any Weekend Warrior Can Tackle. The Pre-packaged Standard White Inlet Kit With Pipe Includes Everything You Need To Install One Inlet. We Recommend One Inlet Per 700 Square Feet. Standard Inlets Are Wired With Low Voltage Wiring And Are To Be Used With Standard Hoses, Standard On/off Hoses, Or A Pigtail Electric Hose.
• Top Quality Central Vacuum Accessories And Installation Parts Includes Pipe, Fittings & Central Vacuum Wall Plates – All Are Developed And Made In North America By The Zvac Central Vacuum Engineers Of Chantilly, Virginia In America!
• This All In One Central Vacuum Kit Is Enough To Cover Up To 700 Sqft Of A Home (actual Coverage Size Will Vary Depending Upon Home Layout And Locations Of Central Vacuum Inlets). This Rough In Kit By Zvac Does Not Require Oversize Shipping Rates As Most Others Do! You Can Always Buy More Inlets And Fittings If Needed. This Zvac Install Kit Uses Standard Central Vacuum Piping, Fittings And Inlets That Are To Astm F2158 Standards.

Feature

Feature

• 1. 375” x 30 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
• Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
• The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue
• Compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, m + s, MD, Imperium, and most regional brands
• The eva body and pearl gray color will not mark walls, floors, or furnishings and the 35 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present
• The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide a simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
• Low voltage hose, so it is not compatible with electric power nozzles
• Hose is made in the USA