700 reviews analysed
1. Spigotmaster ~SM01.125 Vacuum Breaker Adapter~ Converts an Arrowhead PK1360 Anti-Siphon Valve Into a Straight Through Connection
Feature
- Converts an Arrowhead Anti-Siphon Hose Bib Into A Normal Garden Hose Connection That Won’t leak!
- We Make 3 Models to Fit Most Spigots with External Backflow Preventers – MAKE SURE YOU MEASURE BEFORE ORDERING!
- SM01 ~ For Arrowhead Spigots When You Can Remove the Entire Vacuum Breaker. Fine Threads are 1″ in Diameter
- SM01.125 ~ For Arrowhead Spigots When You Can Only Remove the Bottom Part of the Vacuum Breaker or Where the External Thread Diameter Measures 1.17″
- SM-XL ~ For NIBCO Hose Bibs & Watts Spigots Widely Used in Canada Where the External Thread Diameter is 1.25″ (1-1/4″ Fine Thread)
2. Wilkins 1-975XL2 Backflow Preventer
Description
Reduced Pressure Principle Backflow Preventer provides high hazard protection for potable water applications. The wye pattern, bronze body provides separate access to each check valve and the relief valve for servicing.
3. SUNGATOR 2-Pack Vacuum Breaker Set, 3/4 Inch Backflow Preventer, Anti-Siphon Hose Bib Valve for Garden Spigot, RV, Solid Brass Anti-Backflow Valve with Teflon Tape
Feature
- 【ADVANCED FUNCTION】: Break-off screw for permanent attachment
- eliminates back-siphonage into water supply
- anti-backflow valve for RV, garden spigot, outside water faucets, hose bibs, hydrants. Protect you from drinking the dirty water remaining in the hose for a very long time
- 【DRAIN HOLE】: Drain hole is able to drain the remained water in the pipe to prevent further contamination. WARNING :Please keep away from the Backflow Preventer when turning off the water, remained water will be sprayed out
- 【SPECIFICATIONS】: 3/4 inch female hose threaded inlet × 3/4 inch male hose threaded outlet
- max operating pressure is 125 psi
- max operating temperature is 180°F/82°C
- 【HIGH QUALITY】: Durable brass material stays longer and is resistant to corrosion
- Meets ASSE 1011/CSA B64.2, Meets ANSI/NSF 61-9
- 【PACKAGE INCLUDES】: 2 × Vacuum Breakers, 4 × Washers, 1 × Teflon Tape (About 350″ long) and 1 × Plastic Box
4. Homewerks VAC-BFP-Z4B Vacuum Breaker, 3/4-Inch, BRASS
Feature
- 3/4-Inch self draining vacuum breaker
- Male hose thread
- Break-off screw for permanent attachment
- Meets ASSE 1011/CSA B64.2, Meets ANSI/NSF 61-9
- Max. operating temp. rating: 180º F/82º C, Max. operating pressure rating: 125 PSI
- 3/4-Inch hose thread outlet
- Break-off screw for permanent attachment
- Meets ASSE 1011 / CSA B64.2 Standards
- Meets ANSI / NSF 61 low lead requirements
Description
Product Description
Fits any 3/4 male hose thread outlet. Break off attachment screw for permanent installation. Hose threads comply with ANSI B1.20.7. 3/4 Fits any 3/4 male hose thread outlet Break off attachment screw for permanent installation Hose threads comply with ANSI B1.20.7 Brass Csa certified Asse approved.
From the Manufacturer
Homewerks VAC-BFP-Z4B Vacuum Breaker, Male Hose Thread, 3/4-Inch.
5. Wilkins 34-975XL2 3/4-Inch Lead Free Reduced Pressure Backflow Preventer
6. American Valve MVB 3/4" Hose Connection Vacuum Breaker
Description
The American Valve MVB is a brass vacuum breaker that protects against the flow of polluted water back into the potable water supply. It contains a manual freeze relief feature to protect the valve during freezing conditions. This valve is not intended to convey water for human consumption.
7. FEBCO 765 3/4′ PRESSURE VACUUM BREAKER COMPLETE DEVICE
Description
Febco, 3/4″, 765 Pressure Vacuum Breaker EDP , Used To Protect Against Health Hazard & Non-Health Hazard Backsiphonage Conditions For Lawn Sprinkler Irrigation Systems, Swimming Pools, Laundries & Industrial Plants, All Bronze Body For Durability With 1 Check Valve & An Air Opening In On Assembly, Lightweight Poppet Seals Air Opening Under Minimum Flow Conditions, All Internal Parts Serviceable In Line From Top Of Unit, Designed For Minimal Head Loss, Engineered Plastic Bonnet Protects Valve Body Form Freeze Damage, To Repair Damaged Bonnet & Poppett Use True Value Bobbet Poppett Repair Kit Febco #953422, Pressure Vacuum Breaker Assemblies Should Be Installed At Least 12″ Above The Highest Piping & Outlet Downstream Of The Assembly To Preclude Backpressure, Assemblies Should Be Installed So They Are Easily Accessible For Maintenance & Periodic Tests, Asse 1020, Csa B64.1.2 & UPC Code Approved & Listed.
8. Zurn Wilkins 1-350XL Double Check Lead-Free Composite Vessel Valve Assembly, 1"
Description
This valve assembly is designed for installation on water lines to protect against both back-siphon age and back-pressure of polluted water into the water supply. Assembly shall provide protection where a potential health hazard does not exist.
9. Arrowhead PK1390 Replacement Self Draining Vacuum Breaker
Feature
- Hose bibs and most products are excluded from the requirements of being “lead free”
- Arrowhead has residential, retail and commercial products
- Valves are not intended to be used for potable (drinking) water applications
- Replacement breaker for frost-free hydrants with fine threads, Durable nickel-plated construction protects against elements
- Designed for outdoor use, breaker is not for potable water
Description
Product Description
With fine machine threads for attachment to wall hydrant. Nickel plated-for use on 485BFP & 486BFP frost proof wall hydrants The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems. • Red brass construction, nickel plated for protection from extreme weather • Drains water from faucet upon shut off • For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks • Red brass with 80-83% copper content • For outdoor use; not for potable water • ASSE 1019 approved; IAMPO certified
From the Manufacturer
With fine machine threads for attachment to wall hydrant. Nickel plated-for use on 485BFP & 486BFP frost proof wall hydrants
10. Eastman 60158 Vacuum Relief Valve, 3/4" MIP
Feature
- CONNECTION: 3/4-inch MIP (Male Iron Pipe) Connection
- MATERIAL: This valve has an all brass body construction making it sturdy and durable
- USE: This vacuum relief valve is used for automatic venting of closed systems to atmosphere when a vacuum is created
- FEATURE: It consists of a black protective cap for extra protection
- TESTED: This product is tested and rated to ANSI z21. 22 and complies with lead-free plumbing laws
Conclusion
By our suggestions above, we hope that you can found Vacuum Braker K960 for you.Please don’t forget to share your experience by comment in this post. Thank you!
