888 reviews analysed
1. Manelord Auto Body Repair Tool Kit, Car Dent Puller with Double Pole Bridge Dent Puller, Glue Puller Tabs, Glue Shovel for Auto Dent Removal, Minor dents, Door Dings and Hail Damage
- Professional design – Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor.
- Protecting the original paint – The dent puller is made of tempered high-carbon stainless steel and standard stainless steel. in the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint.
- Widely used – Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
- Do it yourself – Dent repair kit coming with detailed repair steps introduction for operate, it makes the dent removal process so easy. Instead of spending hundreds of money in 4s shops, our tool kit can help you repair your cars by yourself for many times, so it can save a lot of money and time for you.
- Amazon Returns Guarantee – You will enjoy professional service center, 30-day full amount refunding, quality warranty and technical support. Excellent customer service brings you no worries after purchase. Please feel free to reach us if you have any question or dissatisfaction. Note: No glue gun and glue sticks included.
Manelord professional auto dent repair kit do the job for you.
Save cash and enjoy your time while you witness these tabs recover your car’s dents like it’s never been damaged before.
Please don’t worry about how to use this kit even if you never handle it before. Our package coming with detailed repair steps introduction for operate, it makes the dent removal process easily.
1 x Double pole bridge dent puller
5 x Black glue puller tabs
5 x Blue glue puller tabs
2 x Glue shovel
1 x Empty alcohol bottle
1 x Black Clean Cloth
1 x Instructions
Easy to use: (Suit for dent&ding and home DIY repair)
Step 1.Clean dent surface.
Step 2.Put the glue sticks to gun and heat, connect the power source and preheat for 8-10 minutes.
Step 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
Step 4.Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
Step 5.After the glue cooling,use a golden dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.
Step 6.After finishing the dent,use the alcohol to clean the glue which on the car and the puller tabs.
Note: For detailed operation, please refer to the instruction manual. Note:(No glue gun and glue sticks included)
2. Portable Sand Blasting Machine, Benchtop Sandblaster Rust Removal Polishing Jewelry Sandblasting Tools Abrasive Blast Cabinet
- HIGH QUALITYg: Made of high quality materials, reliable quality, sturdy and durable, the metal parts of the sandblasting machine are basically not damaged, the dimensional accuracy will not change
- low energy consumption and low cost.
- ADVANTAGES OF BLASTING MACHINE: The blasting machine is used to remove the metal oxide layer, rust and impurities after casting, preserve the blasting powder and recycle it, and it can handle the grooves, concave surfaces and other hard-to-reach parts very easily.
- SCOPE OF APPLICATION: Sand blasting machine is used for surface pre-treatment of various metals, glass, jade, plexiglass, etc. before painting: before painting, before baking
- before spraying
- before metal spraying
- before galvanizing, chromium, nickel
- oxidation treatment Waiting before.
- POLISHED METAL SURFACE: Sand blasting machine is used to polish metal surface decoration to increase or decrease surface roughness, enhance surface lubrication, reduce noise, increase surface friction coefficient, get matte or diffuse surface, and polish wood surface. For the degree of product surface requirements, this specific depends on dry or wet spray. If it is dry spray, there are many choices of abrasive. The wet spray is generally glass sand.
- MULTIPLE USES: cleaning and preservation of parchment and other artwork, cleaning of brushes, contactors and wiring surfaces, improving electrical conductivity, sintering residue on the surface of ceramic components
- flashing of plastic molded parts, error on porcelain Sintered layer
- scratches on the decorative surface, etc.
Condition: 100% Brand New
Color: As pictures show
Optional Plug: US Plug
1 * Sand Blasting Machine
(1) Blasting machine failure phenomenon: no compressed air, no abrasive
Possible reasons: 1. Compressed air is not open
2. The pressure regulating valve is too low
3. The foot switch is not adjusted or damaged
4. Sandblasting or abrasive valve blockage
5. The safety air passage is cut off
6. The main pressure regulating valve of the sand blasting machine is broken.
7. The control pressure regulating valve is broken.
Remedy: 1. Open the air source
2. Adjust the pressure to 0.5MPa or more
3. Adjust or replace the foot switch
4. Clean the nozzle or abrasive valve or reload
5. Check the valve on the safety air line
6. Check the main regulator of the blasting machine
7. Check the blasting machine control valve
(2) Blowing machine failure phenomenon: good sand material enters the dust bag
Possible reasons: 1. The new vacuum bag has a large gap.
2. The sand is too fine
Remedy: 1. It can be removed after 8 hours of general use.
2. Use coarser sand
(3) Failure phenomenon of sand blasting machine: loss of sand material
Possible cause: The vacuum bag has holes or is not clamped
Remedy: Replace the vacuum bag and re-clamp the vacuum bag
(4) Blowing machine failure phenomenon: the line of sight is unclear when sandblasting
Possible reasons: 1. Vacuum bag is blocked
2. Vacuum bag aging blocked
3. There is too much dust in the sand
4. Compressed air pressure is too high
Remedy: 1. Rapping sand blasting machine vacuum bag
2. Replace the blasting machine vacuum bag
3. Replace the sand
4. Press the recommended pressure of the sand blasting machine to lower
3. Treedix 64 Values 1280 pcs Metal Film Resistor High Precision Resistor Resistance Assortment kit for Arduino Respberry Pi Projects
- Metal film resistor is one kind of the film resistors, which is using vacuum deposition to put nichrome and other alloy onto the surface of the ceramic bar to shape a coating, through cutting to set the resistance in order to be up to the mark, and finally let surface protected by epoxide resin.
- Good soldering tin pin is easy for manual installation and maintenance & repair, making it work fast and well with breadboard, helping you build your arduino kit quickly.
- Compared with carbon film resistor, metal film resistor have the features of small volume, small size, low noise, good stability, whose ability of thermal resistance, temperature coefficient, voltage coefficient is more excellent than carbon film resistor.
- To sum up, Treedix Metal Film Resistor have the features of Low cost, Generates less noise than carbon composition resistor,Wide operating range, Long-term stability, Low tolerance, Low temperature co-efficient of resistance, Very small in size, High quality of thermal conduction ceramic core, High resistance accuracy.
- A Color Code Chart is enclosed in the package sheet and it will help you to learn the different value of each color.
4. Corsa 14333BLK Black Tip Kit (Ford Mustang GT)
CORSA Performance Black PVD Pro-Series tips are dual-walled stainless steel. The dual-wall is designed to protect against heat distortion and maintain visual appeal. Each tip is adorned with high-definition, precision laser engraving that provides unmatched detail. Physical Vapor Deposition (PVD) Technology: PVD is a vacuum coating process of vaporizing a solid metal to a plasma of atoms. Vapor is deposited as a high performance reflective coating to create our black stainless steel Pro-Series tips. CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
5. Corsa Performance TK009BLK Exhaust Tip Kit Universal Single 4.5 in. Angle Cut Round No Resonator 9.2 in. Overall Length 3 in. Dia. Pipe Slash Cut Clamp Incl. Black PVD Exhaust Tip Kit
CORSA Performance Black PVD Pro-Series tips are dual-walled stainless steel. The dual-wall is designed to protect against heat distortion and maintain visual appeal. Each tip is adorned with high-definition, precision laser engraving that provides unmatched detail. Physical Vapor Deposition (PVD) Technology: PVD is a vacuum coating process of vaporizing a solid metal to a plasma of atoms. Vapor is deposited as a high performance reflective coating to create our black stainless steel Pro-Series tips.
By our suggestions above, we hope that you can found Vacuum Deposition Coatings for you.Please don’t forget to share your experience by comment in this post. Thank you!