The Best Vacuum Pump One Way Valve

Specifications:

Shell material: PA66 (Nylon)
Diaphragm material: VITON
Spring material: SUS316L
Diameter: 3.2mm/0.125 inch
Total length: 40mm/1.57 inch
Opening pressure: ≤1 Kpa
Maximum back pressure: ≥300K pa

※The pipe port designs a pagoda card slot, non-slip, good airtightness, the port outer diameter is available in 4 sizes, suitable for 3.2 to 9MM inner hole hose to connect, user-friendly design, easy to use
※Self-contained gas flow direction signs on the valve body for convenient installation. Avoid repeated installation and debugging work
※Under 25 Degrees Celsius ~ 135 Degrees Celsius environment works. Reliable quality, no need to worry about high temperature damage in the cabin
※Used in automotive system to prevent backflow of gases or liquids in the piping. One-way valves are commonly used in brake boosters – air conditioning damper ducts – exhaust valve ducts and wiper sprinkler ducts on automobiles. The one-way valve is widely used and can be reasonably used according to individual needs.

Package include:

2x Check Valve

Features:
1.Made of ecofriendly rubber and light weighted aluminum alloy, aging resistant, durable and reliable.
2.The step joints is easy to install and not readlly easy to fall off,also can help quickly prime the fuel system.
3.Ordinarily used for outboard or inboard engines. And for fuel supply to the out-board engine.
4.It is widely used in transferring oil, petrol & diesel.

Specification:
1.Material: Rubber and light weighted aluminum alloy
2.Interface Size: 6mm
3.Color: Black
4.Weight: 80.5g
5.Dimension:15 x 4.4cm/5.91 x 1.73″(L x Dia)
6.Package included: 2 pc

Specifications:

Shell material: ABS resin
Diaphragm material: silicon rubber
Diameter: 10mm/0.39 inch
Total length: 43mm/1.69 inch
Opening pressure: ≤0.5 Kpa
Maximum back pressure: ≥0.3 Mpa

※Medical grade material, safe and nontoxic;
※Strong resistance to acid, alkali, salt corrosion ability;
※Under 25 Degrees Celsius ~ 60 Degrees Celsius environment is normal performance, and has good form ability.
※Used in fluid system to prevent reverse flow flow, or used in pneumatic system to prevent reverse flow of compressed air.

Package include:

1x Check Valve

Product Description: Motorcycle brake bleeder bleeding tool kit.

Bleed motorcycle brakes quicklyand easily with the Little Bleeder.
Product Features:
Bleed motorcycle brakes quickly and easily with the Little Bleeder.
Internal valve prevents air being drawn into the system.
Easy to use, simply connect and pump.
Aluminum body to resist corrosion from brake fluid; unscrews for easy cleaning. Complete with rubber tubing.

How to Use:
– Using the kit – Uncover the bleed nipple of the caliper.
Place the end of the hose onto the bleed nipple and secure with hose clip.
– Check that the valve unit is facing the correct way, the direction of arrow onthe unit should be pointing away from the caliper.
– Have a container ready to collect the brake fluid that will be flushed out ofthe system.
– When ready, Start Pumping the brake Lever and topping up the fluid until allair has been flushed through and the fluid level is correct in the mastercylinder reservoir.
Close Reservoir
– Remove the hose from the bleed nipple, clean away any excess fluid and replacecover onto the nipple.
– Dispose of any excess brake fluid
– The valve unit and hoses should be taken apart and drained thoroughly, openthe valve unit by unscrewing the body.

Product Specification:
Type: Motorcycle brake bleeder bleeding tool kit
Material: Aluminum & Rubber
Total Length :18.89 in(480 mm )
Valve Length: 2.17 in(55 mm)
Tube Inner Diameter: 0.2 in(5 mm)
Tube Outer Diameter: 0.31 in(8 mm)
Net weight: 1.1oz(33g)
Package Includes: 1 x Brake Bleeder Tool Kit(Three tube buckles).

Specifications:

Shell material: PA66 (Nylon)
Diaphragm material: VITON
Spring material: SUS316L
Diameter: 4.5mm/0.177 inch
Total length: 40mm/1.57 inch
Opening pressure: ≤1 Kpa
Maximum back pressure: ≥300K pa

※The pipe port designs a pagoda card slot, non-slip, good airtightness, the port outer diameter is available in 4 sizes, suitable for 3.2 to 9MM inner hole hose to connect, user-friendly design, easy to use
※Self-contained gas flow direction signs on the valve body for convenient installation. Avoid repeated installation and debugging work
※Under 25 Degrees Celsius ~ 135 Degrees Celsius environment works. Reliable quality, no need to worry about high temperature damage in the cabin
※Used in automotive system to prevent backflow of gases or liquids in the piping. One-way valves are commonly used in brake boosters – air conditioning damper ducts – exhaust valve ducts and wiper sprinkler ducts on automobiles. The one-way valve is widely used and can be reasonably used according to individual needs.

Package include:

2x Check Valve

Material:
These one way check valves are made of quality PVDF, wear-resistant and durable, ensures long-term use.

Wide usage:
The non-return check valves are designed for fluid systems to prevent countercurrent liquids or for pneumatic systems to prevent reverse flow of compressed air, can be applied to automotive parts, machinery industry, household appliances, agriculture, etc.

Specifications:
Shell material: PVDF
Diaphragm material: VITON
Diameter: 6.3 mm/ 0.236 inch
Total length: 38 mm/ 1.49 inch
Opening pressure: ≤ 0.5 Kpa
Maximum back pressure: ≥ 300Kpa

Package includes:
4 x PVDF check valves