The Best Water Cooling For Asus Gtx 1060 Strix Graphics

Compatibilities List (Including but not limited to the following models)
Please send us message to confirm if you are not sure about the compatibilities. Thanks.
Asus ROG-STRIX-GTX 1080TI-O11G-GAMING
Asus ROG-STRIX-GTX 1080-O8G-GAMING
Asus ROG-STRIX-GTX 1070TI-8G-GAMING
Asus ROG-STRIX-GTX 1070-O8G-GAMING
Asus ROG-STRIX-GTX 1070-8G-GAMING
Asus DRAGON GTX 1070-O8G
Asus DRAGON GTX 1070-TOP8G
Asus ROG-STRIX-GTX 1060-O6G-GAMING

Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance! Direct cooling of the graphics core (GPU), memory (RAM) key heating parts of the graphics, to ensure stability when overclocking.
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful. The upper cover using high quality POM materials or acrylic to ensure block long life and durability.
4. Inlet and outlet can change direction free, easy to build CF and Crossfire system.

Please Pay Attention:
1. Please double check the graphics card detail model to ensure compatibility
2. 2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. The pictures are for reference only, we can only guarantee the performance and compatibility of the products, the factory can change product design at any time for the improvement of the product.
4. Prohibit the use of alcohol containing coolant.
5. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.

The all-new Kraken Z Series lets you personalize your all-in-one liquid cooler like never before. Through CAM’s unique software interface, you can do more than simply fine-tune settings; you can now display your favorite images and animated gifs, or CAM system information, allowing for total customization. Backed by a 6-year, the Kraken Z Series provides superior performance in liquid cooling, simple installation, and a look that is uniquely your own.

EK-FC1080 GTX Ti Backplate is a CNC machined retention backplate made from black anodized aluminum for EK-FC1080 GTX Ti series water blocks.

Backplate covers the whole length of graphics cards PCB, serves as an aesthetic add-on and also provides passive cooling for the backside of voltage regulation module (VRM).

This backplate is guaranteed to be compatible only with reference design NVIDIA GeForce GTX 1080 Ti graphics cards.

Enclosed:
– EK-FC1080 GTX Ti Backplate – Black
– Mounting mechanism
– Thermal pads

Made in Slovenia – Europe!

Model: 3831109831939

EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.

Model: 3831109831977

EK-FC GeForce GTX FE RGB is a high-performance full-cover water block for multiple NVIDIA GeForce GTX and Titan Pascal series graphics cards that comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeForce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.See EKWB site for full video card compatibility list.

Model: 3830046995780

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

EK-Vector FTW3 RTX 2080 Ti Backplate – Nickel is a CNC machined retention backplate made from nickel plated aluminum, that fits all EK-Vector FTW3 RTX 2080 Ti water blocks.

Backplate covers the whole length of graphics cards PCB, serves as an aesthetic add-on and also provides passive cooling for the backside of the voltage regulation module (VRM) and the GPU core.

This backplate is guaranteed to be compatible with all EVGA FTW3® RTX 2080 Ti graphics cards.

Enclosed:
– EK-Vector FTW3 RTX 2080 Ti Backplate – Nickel
– Mounting mechanism
– Thermal pads

Made in Slovenia – Europe!

Model: 3831109816844

An RGB upgrade kit for existing EK-FC GeForce GTX FE high-performance full-cover water blocks that fit NVIDIA GeForce GTX and Titan X Pascal based graphics cards. The upgrade kit includes a 4-pin 12V RGB LED strip. The kit enables a quick and easy upgrade of the existing EK-FC GeForce GTX FE to the latest RGB version of the full-cover water block. The kit includes all necessary parts to perform the upgrade, including a fresh set of screws, thermal pads, O-rings, Allen keys, new RGB ready plexi top, aluminum cover with an already installed RGB strip and a fresh EK badge. The only things reused from the previous block are the nickel plated cold plate and the terminal. To avoid cracking your brand new RGB plexi top, use only 0.5 – 0.7 Nm of torque force on the terminal screws. Do not use excessive force when re-tightening the screws as the plexi top might crack or the threads might get stripped thus rendering the water block useless. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. Model: 3830046996848.

EK-Vector RTX Backplate – Nickel is a CNC machined retention backplate made from nickel plated aluminum, that fits all EK-Vector Strix RTX 2080 Ti water blocks.

Backplate covers the whole length of graphics cards PCB, serves as an aesthetic add-on and also provides passive cooling for the backside of the voltage regulation module (VRM) and the GPU core.

This backplate is guaranteed to be compatible with all ROG Strix RTX 2080 Ti cards graphics cards.

Enclosed:

• EK-Vector Strix RTX 2080 Ti Backplate – Nickel
• Mounting mechanism
• Thermal pads

Model: 3831109814987